How do you replace the radiator on a Toyota Camry?
Insert the new radiator into the engine bay. Attach all hoses connected to the radiator, and secure them with the hose clamps. Re-install the hood latch and upper mounting bolts. Re-install the radiator fan and air box. Lastly, fill the radiator with new coolant and bleed the cooling system.
Where is the overflow hose on a Toyota Camry?
Pull the overflow hose off of the radiator; it is located next to the radiator cap. Then use pliers to loosen the hose clamps on the upper radiator hose, and slide the hose off of the radiator. Figure 6. Location of overflow hose.
How to disassemble a Toyota Camry 2.4 liter engine?
How to Disassemble Toyota Camry 2.4 VVT-i engine: Balance Shafts removal An error occurred while retrieving sharing information. Please try again later.
Can a radiator be replaced when the engine is hot?
As a word of caution, never repair or replace your radiator when your engine is hot. Open the drain cock on the bottom of the radiator to drain the coolant. The drain cock doesn’t need to be removed; it just has to be loosened to allow the coolant to drain.
How do you remove a radiator from a car?
Remove the four 10mm bolts on the edges of the A/C condenser; the condenser does not have to be removed, so make sure not to pull on it as it will crack the A/C lines. The radiator is now free and can be removed. Carefully maneuver the radiator up and out of the engine bay.
Where does the coolant go in a Toyota Camry?
The Toyota Camry does not use a pressurized cooling system with a surge tank, but instead uses a traditional system with an overflow tank. For this system, stop leak can be added directly into the radiator. With the engine cool, open the radiator cap. Inspect the coolant level.
Why is my radiator leaking on my Toyota Camry?
This article applies to the Toyota Camry (1997-2011). The radiator is one of the main components of the cooling system that keeps your engine running at a safe temperature. A leaking radiator can lead to overheating issues and serious engine damage if left untreated.
Where are the fan shrouds on a Toyota Camry?
There are two fan shrouds—on the driver’s side for coolant, and the passenger side for the condenser—and two supply and return ATF connection points. 1.