How do you replace a headlight on a car?
Facing the front of the car with your right hand on the forward end of the fuse box, squeeze the sides of the fuse box lid, press the end tab with your index finger and lift up. The hinge for the fuse box lid will be near your elbow and so the front of the fuse box lid will swing up. Lift and detach.
How do you replace a headlight on a Prius?
Remember the prongs are in the pattern of an upside-down “U”. Push the socket securely onto the back of the lamp. 10) Test the lights to ensure that the lamps are working. 11) If replacing the driver side lamp, replace the fuse box lid. 12) If replacing the passenger side lamp, replace the air intake bracket.
Where is the retaining clip on a passenger side headlight?
7) Reattach the retaining clip by swiveling it behind the lamp, pushing down on the top of the clip and latching the clip into the receiving hole. On both the driver and passenger lamps, the receiving hole for the clip will be on the passenger side of the headlight assembly.
Insert the flat end of a flat-head screwdriver below the head of the clip and the mating surface and pry the clip off. Repeat this process for all the clips. Remove the five retaining clips on top of the bumper, including the ones near the grille. Perform the same procedure on these clips that you used to remove the bottom clips.
Where is the fuse panel on a Volkswagen Passat?
The fuse panel is located behind the cover on the driver’s side of the dashboard. It is behind the trim panel on the driver’s side. *Numbers in parentheses indicate production control number stamped on relay housing.
Where are the screws on a headlight assembly?
Two screws are located on the far top-left of the bumper and the other two on the far top-right. Slide the bumper out by pulling it away from the vehicle once all of the screws have been removed. Use the socket wrench to remove the holding bracket underneath the headlight assembly.