How do you replace a front wheel on a Saturn Ion?
Attach the steering knuckle to the suspension strut, align the mounting holes, and push in the two (2) bolts. Since the bolts are splined, the bolts must be hammered into the steering knuckle. Screw on the bolt nuts and torque down. Torque down the CV axle shaft nut.
How do you remove steering knuckle from Saturn Ion?
Remove the two (2) nuts and bolts that holds the steering knuckle to the suspension strut. The bolts have splines and must be hammered out of the steering knuckle. Protect the bolt threads by keeping the bolt’s nut on the end of the bolt threads. Detach the steering knuckle from the suspension strut. A pry bar can help with the removal.
Where is the ION’s drum on a car?
The Ion’s drum is not a bearing-held assembly that’s bolted to the rear spindle; it’s called a “knock-off” drum, and despite this nickname, it’s often stuck to the rear mating joint of the axle. The shoes underneath the drum can also hang up the drum.
Where is the rear brake drum on a Saturn Ion?
There are a couple of scenarios that can make removing the rear brake drum on a Saturn Ion slightly confounding. The Ion’s drum is not a bearing-held assembly that’s bolted to the rear spindle; it’s called a “knock-off” drum, and despite this nickname, it’s often stuck to the rear mating joint of the axle.
What should I Remove before removing an axle?
Before beginning the leaf spring removal, remove the brake lines and cables to get them out of the way. This is probably the biggest deterrent to most owners when removing an axle as the brake lines may be excessively corroded and the head of the brake fitting may strip.
Can a rear axle be removed from a tri five?
Tri-Five vehicles use a leaf spring style (or Hotchkis) of rear suspension. If your vehicle has a coil-style arrangement, there are some differences for removing the axle from the vehicle. The main one is that there are control arms bolted between the axle and frame or body that need to be removed.
Why do you remove shocks from an axle?
Typically, the shocks are the travel limiters of the axle at full rebound. So, once the vehicle is securely supported by jack stands, remove the shocks. This allows the axle assembly to drop even lower in the chassis.
How to rebuild a Ford 8.8 inch differential?
This Tech Tip is From the Full Book, FORD DIFFERENTIALS: HOW TO REBUILD THE 8.8 AND 9 INCH. For a comprehensive guide on this entire subject you can visit this link: SHARE THIS ARTICLE: Please feel free to share this post on Facebook / Twitter / Google+ or any automotive Forums or blogs you read.