How do you repair a Hyundai Sonata parking brake?

How do you repair a Hyundai Sonata parking brake?

Loosen the parking brake cable braket bolts and remove the parking brake cable. 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the rear tire and wheel. 3. Remove the rear brake caliper and Rear disc brake. 4. Remove the parking brake cable (B), after removing the fixing clip (A).

How to adjust the parking brake on a Hyundai Accent?

Apply a coating of the specified grease to each sliding parts (A) of the ratchet plate or the ratchet pawl. 4. Install the parking brake cable adjuster, then adjust the parking brake lever stroke by turning adjusting nut (A). After repairing the parking brake shoe, adjust the brake shoe clearance, and then adjust the parking brake lever stroke.

What’s the average speed of a Hyundai Sonata?

Hand type – While operating the arking brake pedal for 68.6N (7kgf, 15.4 lbf) effort, drive the vehicle 500 meters (0.31 miles) at the speed of 60kph (37 mph). Foot type – While operating the parking brake lever for 98N (10kgf, 22lbf) effort, drive the vehicle 500 meters (0.31 miles) at the speed of 60kph (37 mph).

How to repair a broken parking brake switch?

Repair procedures 1. Remove the crash pad lower panel. (Refer to the Body group-crash pad) 2. Remove the junction box. (Refer to the Body Electrical System group – Fuses and Relays) 3. Disconnect the parking brake switch connector (A). 4. Remove the parking brake pedal mounting bolts (A) and nut. (B) 5.

How do you turn off the brake light on a Hyundai Sonata?

The only way to turn the brake light off is to restore proper line pressure to both brake circuits when the pedal is pushed. If your Sonata is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic.

What to do if your Hyundai Sonata is having trouble stopping?

If your Sonata is having trouble stopping, or noticeably leaking fluid, don’t drive it. Just have it towed to a mechanic. If you mess up fixing your engine, the vehicle does not move. If you mess up fixing the brakes, it doesn’t stop.

Where is the parking brake on a Hyundai?

After the adjustment, check that the rear brakes do not drag with the parking brake lever released internal88 : http://i.imgur.com/ITxo3Mu.jpg internal88 : It’s not in the back axle. internal88 : It is at the end of the emergency brake handle. internal88 : Let me know if you have further questions. internal88, Hyundai Mechanic Category: Hyundai

How to adjust the emergency brake, it didn’t pass?

If the number of notches is not the standard value, adjust the cable length with the adjusting nut on the equalizer. The indicator light will go out when the brake lever is fully released, and will light with the lever pulled one notch. If it does not operate, replace it.

Are there any manuals for the Hyundai Sonata?

In the table below you can see 0 Sonata Workshop Manuals,0 Sonata Owners Manuals and 18 Miscellaneous Hyundai Sonata downloads. Our most popular manual is the Hyundai Sonata Workshop Manual (V6-3.3L (2006)) . This (like all of our manuals) is available to download for free in PDF format.

Why does my Hyundai Sonata squeal when I back it up?

I bought this Sonata 2 weeks ago and it has 1100 miles on it. Lately I am hearing the rear brake squealing when applying the brake while backing the vehicle. When I put it back in Drive (tap the brake) it doesn’t have that sound anymore. It only happens after the vehicle has been parked for 4 hours or more.

How to adjust the parking brake on a Hyundai Sonata?

Adjust the parking brake pedal stroke by turning the adjusting nut (A). Operate the parking brake pedal through a full stroke over 3 times for setting the parking cables. Adjust the adjusting nut (A) for parking brake pedal stroke 4~5notches when operating effort is 196N (20kgf.44lb).

How to adjust the parking brake on a Kia Rio?

Install the parking brake cable adjuster, then adjust the parking brake lever stroke by turning adjusting nut (A). After repairing the parking brake shoe, adjust the brake shoe clearance, and then adjust the parking brake lever stroke. (Refer to “Parking brake shoe installation”)

Hand type – While operating the arking brake pedal for 68.6N (7kgf, 15.4 lbf) effort, drive the vehicle 500 meters (0.31 miles) at the speed of 60kph (37 mph). Foot type – While operating the parking brake lever for 98N (10kgf, 22lbf) effort, drive the vehicle 500 meters (0.31 miles) at the speed of 60kph (37 mph).

How often do you put the brakes on a Hyundai?

Repeat this process several times. Each time you do this, the pedal pressure should become more and more firm. You should only need to do this three to four times. Drive the Hyundai at 40 mph. Apply the brakes in a controlled and normal fashion until you slow down to 10 mph, but do not stop the vehicle.

Posted In Q&A