How do you remove a trunk lock cylinder?
Tip: If you have the bolt-secured type of lock cylinder, you may need to use a socket wrench to loosen, and later tighten, this bolt. If you have the type of lock cylinder that is secured by a retaining clip, you will need to use gloves and needle nose pliers. Step 4: Remove the trunk lock cylinder.
How to get affordable ignition lock cylinder housing?
Get affordable ignition lock housings you deserve. In just 10 minutes, you could save up to 80% with PartsGeek. Save time and dollars on your next lock housings purchase. Over 12 Years of saving people money and providing great customer service. Check our low-cost options today.
How do you replace a retaining bolt on a trunk lock?
Replacing the retaining bolt is pretty straightforward; just hand tighten the bolt. If you have a retaining clip, you will likely need gloves and needle nose pliers to line it up and press it into position without cutting yourself or hurting a knuckle.
What causes the ignition lock housing to wear out?
One of the fastest ways to wear out this part is to use keys with very heavy keychains. This pulls on the housing for the ignition lock, causing wear. You can find this part and others for your vehicle here at PartsGeek.com. To get the right part, order using your make, model, and year.
Do you have to replace the lock cylinder in a car?
Sometimes, when the lock cylinder starts going out, you can jiggle the key to get it to turn. But eventually, that trick no longer works, and you’re left with a car that doesn’t start. That means you (or your mechanic) will have to replace the lock cylinder. On some vehicles, this task is relatively straightforward.
How do you change the ignition lock cylinder?
Turn the ignition key to the ACC, START, or RUN position as specified in the repair information. Align the lock cylinder with the keyway in the housing and the slot for the retaining tab. Push the lock cylinder in so that the locking tab locks against the housing. Reinstall the trim panels you removed to access the lock cylinder.
What’s the name of the ignition lock housing?
This is a modal window. The ACDelco GM Original Equipment Ignition Lock Housing is a GM-recommended replacement for your vehicle’s original component. It houses the ignition lock cylinder.
When do I need to replace my ignition lock housing?
The Febi ignition lock housing may need to be replaced if it gets damaged from heavy keys or roughly jamming keys into the lock. The Febi ignition lock housing surrounds and protects the lock for your vehicle’s ignition. For some vehicles the ignition lock housing may not include the electronic components.
How to replace the cylinder on an ignition lock?
Part 1 of 1: Replacing the ignition lock cylinder 1 Boxed end wrench or ratchet sets 2 Flashlight or drop light 3 Replacement ignition lock cylinder 4 Regular sized flat blade and Phillips head screwdriver 5 Safety equipment (safety glasses) 6 Scan tool 7 Small flat blade screwdriver More …
Can you remove tumbler from GM ignition switch?
Removing a key lock and tumbler from a GM-style ignition switch. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.