How do you remove a serpentine belt on a Mercedes Benz?
Using either your E10 socket or 17mm, turn the tensioner counterclockwise to remove tension from the belt. Insert your punch or rivet into the tensioner. This will lock the tensioner in place, and keep tension off of the belt. Un-route the belt from the engine pulleys, and out of the engine. Figure 6.
How do you change the belt on a Ford E350?
Open the hood and remove the air filter intake duct using the socket set. Find the E350’s belt routing diagram and familiarize yourself with it. Move the E350’s serpentine belt tensioner off the belt with the serpentine belt tool. Slip the belt off the tensioner pulley by hand. Move the tensioner back into place.
What happens if your Ford E350 serpentine belt breaks?
If the serpentine belt on your Ford E350 van should break while driving, you’ll end up on the side of the road until a tow truck arrives. To make matters worse, the belt can damage the coolant hoses, electrical wiring and other components when it breaks.
How to tell if your serpentine belt needs to be replaced?
Look for signs of damage or wear on the belt. Once you have located the serpentine belt, inspect it visually for signs of damage. If the belt is frayed, coming apart, or has marks that indicate that it has been rubbing on something, it will need to be replaced.
How do you replace the serpentine belt on a Ford E350?
If you have basic auto-repair skills, you can replace the Ford E350 serpentine belt in less than one hour. Open the hood and remove the air filter intake duct using the socket set. Find the E350’s belt routing diagram and familiarize yourself with it. Move the E350’s serpentine belt tensioner off the belt with the serpentine belt tool.
How do you remove the serpentine belt on a Lexus ES?
Working from inside the wheel well, place the 14mm wrench or socket onto the tensioner bolt. Rotate the bolt counter-clockwise towards the front of the car. While holding it rotated, slide the 5mm hex key into the hole below it to lock it into place. Remove the wrench and remove the serpentine belt. Figure 3. Releasing tension. Figure 4.
What happens if the serpentine belt breaks on a Mercedes Benz?
If the belt breaks, your vehicle will drain the battery and the engine will eventually die. Continue reading to avoid this by learning how to replace the serpentine belt on your Mercedes-Benz E-Class or C-Class.
What’s the difference between old and new belt on Ford E350?
Stretch the E350’s old and new belts out side by side to compare their lengths. The new belt should be roughly 1/2 an inch to 1 inch shorter than the old belt. This discrepancy is due to stretching that occurs during the belt’s lifetime. Loop the belt around the bottom of the E350’s crankshaft pulley by hand.