How do you remove a light bulb from a Kia Rio?
5.Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 6.Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket
How do you remove a brake light from a car?
Use a flat-blade screwdriver to pry the housing up to release the holding clips if there are no visible screws on your housing. Pull the third brake-light housing slightly away from its mounting surface. Rotate the light bulb socket in a counterclockwise direction and pull it straight from the housing. Pull the bulb from the socket and discard it.
How to replace the bulb in a third brake light?
How to Replace the Bulb in a Third Brake Light Step 1. Locate your car’s third brake light housing, which may be accessed from the rear package shelf below the rear… Step 2. Remove the holding screws from the brake-light housing with a Philips screwdriver in a counterclockwise… Step 3. Pull the …
How to change light bulbs in Kia Forte?
Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the “LOCK”position and turn off the lights to avoid burning your fingers or receiving an electric shock. Use only the bulbs of the specified wattage. Be sure to replace the burnedout bulb with one of the same wattage rating.
How to change the brake light on a Kia Rio?
This video shows you how to change the brake lights on your 2004 Kia Rio. When you replace the brake light bulb on your Rio, be careful not to touch the bulb directly with your fingers – the oil from your skin will cause the area that you touched to burn hotter than the rest of the bulb, which causes the bulb to burn out quicker.
What causes a light bulb to burst in a Kia Rio?
Residual oil may cause the bulb to overheat and burst when lit. A bulb should be operated only when installed in a headlight. If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it. Wear eye protection when changing a bulb. Allow the bulb to cool down before handling it.
Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the “LOCK”position and turn off the lights to avoid burning your fingers or receiving an electric shock. Use only the bulbs of the specified wattage. Be sure to replace the burnedout bulb with one of the same wattage rating.
How to install a headlight cover on a Kia Rio?
Install the headlight bulb cover by turning it clockwise. If the headlight aiming adjustment is necessary after the headlight assembly is reinstalled, consult an authorized Kia dealer. Follow the steps 1 to 4 from the previous page.
5.Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 6.Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket
How do you adjust the headlight on a Kia?
If the headlight aiming adjustment is necessary after the headlight assembly is reinstalled, consult an authorized Kia dealer. Follow the steps 1 to 4 from the previous page. 5.Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.