How do you remove a fuel pump from a Harley Davidson?
Gently pull the front seat towards the rear and up. Consult your owner’s manual and locate the fuse box. Remove the fuse for the fuel pump. Your owner’s manual or a chart on the fuse box cover should indicate which one. Once the fuse is removed, start your engine and let it run until the engine dies.
How do you remove fuel pump from Softail?
Use your pliers to loosen the clamp on the fuel hose and disconnect the hose. Reach into the tank and gently remove the fuel pump from the housing, and then remove the pump and the top plate from the tank. These instructions are based on a Harley-Davidson Softail, model years 2003 to 2010.
How can I get my fuel pump to run?
Swap an accessory fuse wuth the ignition fuse and give it a whirl. also if I use a “power probe” and apply battery voltage to the fuel pump fuse the fuel pump does run. thanks nipplesurfer, I did try that yesterday.
When to replace fuel filter on Harley Davidson?
Not only is regular replacement of the fuel filter part of your bike’s basic maintenance needs, but filter replacement will also allow for inspection or replacement of the in-tank fuel lines and fuel pump assembly. A clogged filter can hinder engine performance to the point that the bike may become unrideable.
How do you remove a fuel pump on a Harley?
Harley fuel pump and filter removal is a project you can do with ease. Bob LaRosa and Mark DiPietro take the time to cover all painted areas, drain fuel from the system and use the right tool to remove the pump and filter from the tank. JIMS Tools available at DennisKirk.com – See the JIMS Fuel Pump Retainer Remover Tool on DennisKirk.com.
Use your pliers to loosen the clamp on the fuel hose and disconnect the hose. Reach into the tank and gently remove the fuel pump from the housing, and then remove the pump and the top plate from the tank. These instructions are based on a Harley-Davidson Softail, model years 2003 to 2010.
Not only is regular replacement of the fuel filter part of your bike’s basic maintenance needs, but filter replacement will also allow for inspection or replacement of the in-tank fuel lines and fuel pump assembly. A clogged filter can hinder engine performance to the point that the bike may become unrideable.
Can a clogged filter make a Harley Davidson unrideable?
A clogged filter can hinder engine performance to the point that the bike may become unrideable. This article applies to Harley-Davidson Touring (2000-2015). Your fuel injected Harley Davidson touring bike needs a proper supply of presureized fuel to run properly.
Why does the Harley Davidson Road King have electronic fuel injection?
One of the pieces of technology that Harley-Davidson employed for the Road King is electronic fuel injection. This accomplishes several different things. First and foremost, it provides an avenue for the motorcycle to have more power than it would otherwise. It also allows it to operate more smoothly.
What should I do if my fuel pump fails?
If the fuel pump fails, your engine will not receive the fuel it needs to operate and your engine will not run. Removing your fuel pump is a fairly straight-forward process and can be easily done at home. Move your motorcycle to a flat, dry surface. Ensure you working area is well ventilated to dissipate any fuel vapors.
How do you get fuel out of a gas tank?
Gently lift the console up and disconnect the console wiring by unplugging the wires from the receivers. This will reveal the top plate of your fuel pump. Use the siphon pump and hose to siphon the fuel out of your tank and into a fuel storage container. Consult the siphon pump’s documentation for detailed instructions and warnings.
How does fuel injection work on a Harley Davidson?
Your fuel injected Harley Davidson touring bike needs a proper supply of presureized fuel to run properly. And much like air filters cleanse the air as it enters the engine, fuel filters strain any unwanted contaminants from the fuel before it is plumbed to the fuel injection system.