How do you remove a belt from an alternator?
Locate the adjustable bolt at the top of the adjustment bracket. Loosen the bolt by turning it counterclockwise with the ratchet and the same socket. This will loosen the belt. Slide the belt out from under the adjustment pulley. Then, pull the belt out of the alternator pulley and the crankshaft pulley. Remove the belt from the engine compartment.
How can I check the tension of my alternator belt?
Crank the Protege and let the motor run for around 10 to 15 seconds to completely seat the belt to the inside of the pulleys. Then, turn the motor off and close the hood. The tension of the alternator belt can also be checked with a belt tension checking tool. You can buy this tool at most auto-parts stores that also sell engine belts.
How does the alternator work on a Mazda Protege?
by Grace Mclain. The alternator belt on the 1999 Mazda Protege operates the alternator. The belt runs in the alternator and crankshaft pulleys. When the motor is running, the crankshaft turns the belt around the alternator pulley. Ridges on the inside of the belt travel inside the grooves on the alternator pulley, turning it.
Where is the adjust bracket on an alternator?
The alternator belt is tensioned inside of the alternator pulley and the crankshaft pulley by an adjustment bracket pulley that is located on the left-hand side of the alternator. Locate the bolt head in the center of the adjustment pulley. Loosen the bolt by turning it counterclockwise with the ratchet and a socket.
How much should it cost to replace an alternator belt?
The replacement cost of an alternator belt is typically between $100 and $200 . The part cost is between $25 and $80 while the labor cost is between $75 and $120. Nov 4 2019
How do you replace an alternator belt?
How to Replace Alternator Belt in 5 Steps Step 1 – Check the Alternator Belt Step 2 – Release the Tension Step 3 – Get Familiar with the Alternator Belt Step 4 – Install the New Belt Step 5 – Make the Final Check
How long does it take to change an alternator?
An alternator replacement typically takes around an hour. This is dependent of course on the condition of the old unit and how difficult it is to remove.
How much is it to change and alternator?
Replacing your alternator on your own is an easy enough job as long as you have all of the proper tools to perform the task. The cost to replace an alternator will vary widely depending on your specific vehicle and manufacturer. Replacing an alternator will typically cost you anywhere from $160-390.