How do you push start a motorcycle with a dead battery?
Give Your Bike A Bumpstart
- STEP 1 Switch the key to the “on” position and make sure the kill switch is set to “run”.
- STEP 2 Stand on the left side of the bike and hold both handlebar grips.
- STEP 4 Put the bike in second or third gear.
- STEP 5 With the bike in gear, push it forward until it doesn’t want to move any more.
What happens when you disconnect the battery on a Harley?
Since disconnecting the battery on my harley it wont start. Bike still has power all lights etc since disconnecting the battery on my harley it wont start. Hey there!
Why does my Harley Davidson bike not start?
If you can start the bike this way; the start switch is probably bad, or a wire may be damaged. Let us know what you find. Sounds like you know what you are doing. You are not going to believe this – but – it was the battery in the key fob. The bike has to have a signal from the key fob before it will allow the bike to start.
Why is my Harley Davidson Sportster not charging?
If a new battery fixes your problem, confirm the charging system is working properly by performing the same test with the engine running. A normal reading is near 14 volts. If you find a different value, move to Step 6. Even if your battery’s charge level is normal, it may not have the capacity under load to supply enough amperage.
Why does my Harley Davidson still have power?
Bike still has power all lights etc since disconnecting the battery on my harley it wont start. Hey there! I entered diagnostic mode on my 2018 Heritage because of a check engine light.
Since disconnecting the battery on my harley it wont start. Bike still has power all lights etc since disconnecting the battery on my harley it wont start. Hey there!
Whenever you are trying to diagnose why your bike won’t start, it is always a good idea to remember the elements that allow for combustion to occur: fuel, spark, and battery power. Especially with fuel injected models, if any one of these three elements is removed from the equation, you end up with an engine that will not run.
What should I do if my motorcycle battery wont start?
If you don’t see these symptoms or are otherwise unsure what to look for, the first step is ensuring that the battery is operational and providing the maximum voltage. To confirm your battery is still good, you should visually inspect it, check the voltage, and load test the battery. A visual battery inspection should involve:
Bike still has power all lights etc since disconnecting the battery on my harley it wont start. Hey there! I entered diagnostic mode on my 2018 Heritage because of a check engine light.