How do you pull a throttle cable?
- Step 1: Locate the throttle cable.
- Step 1: Disconnect the throttle cable at the throttle body.
- Step 2: Disconnect the throttle cable from the retaining bracket.
- Step 3: Pull the throttle cable through the firewall.
- Step 4: Disconnecting the throttle cable from the accelerator pedal.
When should I change my motorcycle throttle cable?
For my motorcycle, the throttle and clutch cables are replaced due to any of the following reasons:
- Frayed.
- Age of more than 2 years. Bike is parked outside without cover for most part of the year.
- Damage to the adjuster nuts.
- Kinked.
- Chaffing of outer rubber/coating.
- Throttling or clutching is taking an effort.
Why do I have two throttle cables?
The throttle grip works on the carburettors when twisting/throttling up and when releasing/throttling down. If a rock or something gets caught in the carb housing (if somehow the cover fell off) the spring won’t close the carb slide. The second cable pulls the carb closed so it isn’t stuck wide open.
Are all throttle cables the same?
Usually the push and pull cables are different lengths, and only the pull cable can be adjusted. More importantly, the fittings for the push and pull cable are different. If you need to buy new cables, make sure to buy two different cables instead of two of the same kind, since they aren’t interchangeable.
How to lube your motorcycle throttle and clutch cable the cheap way?
No special “lube tool” needed. – YouTube How to lube your motorcycle throttle and clutch cable the cheap way! No special “lube tool” needed. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
How to lubricate stiff outboard throttle and gear control?
The cables are common with a variety of inboard and outboard boat motors. The technique I show here involves using a simple compressor (or even a bike pump) to force oil down the entire length of the cable. Loading…
Is there a Repair Manual for a Yamaha Vmax?
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have1994 1995 1996 YAMAHA VMAX 500/600 Service Repair Workshop Manual. Thanks for visiting!
What kind of oil do you use on a Yamaha Vmax?
Use oil and/or grease recommended by Yamaha for assembly and adjustment. GASKETS, OIL SEALS, AND O-RINGS 1. All gaskets, seals, and a-rings should be re- placed when an engine is overhauled. All gasket surfaces, oil seal lips, and a-rings must be cleaned.