How do you program a 2007 Pontiac key?
PRESS and HOLD LOCK and UNLOCK buttons at the same time on the first remote for 15 seconds. The vehicle will emit a sound indicating successful programming of the remote. REPEAT Step 4 for any additional remotes to be programmed, including existing ones. TURN ignition OFF and REMOVE key to EXIT Programming Mode.
How do you reset the security system on a 2007 Pontiac G5?
1-Turn ON the ignition, with the engine OFF. 2-Attempt to start the engine, then release the key to ON (vehicle will not start). 3-Observe the SECURITY telltale(this is the security light), after approximately 10 minutes the telltale will turn OFF. 4-Turn OFF the ignition, and wait 5 seconds .
How do you program a Pontiac key fob?
Press and hold LOCK and UNLOCK remote buttons on first remote transmitter simultaneously for 15 seconds. Wait for acoustic signal (indicates correct programming). Repeat above procedure to program remaining remote transmitters. Switch ignition OFF to exit programming mode.
When do you need a replacement Pontiac key?
We specialize in making replacement car keys for Pontiac when you don’t have a spare, need a remote fob key, duplicate smart key, ignition repair, replaced, and more. In addition, we deal with all Pontiac models, including Pontiac Aztek, Bonneville, Firebird, G3, G5, G6, G8, Grand Am, Grand Prix, GTA, GTO, Sunfire, Vibe and more.
How to relearn the Pontiac Torrent remote fob?
PRESS the Trip Odometer Reset Button until “RELEARN REMOTE KEY” is displayed. PRESS and HOLD the Trip Odometer Reset Button for approximately 3 seconds until “REMOTE KEY LEARNING ACTIVE” displays. Vehicle is now in Programming Mode. PRESS and HOLD LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds.
When do I need to replace my Pontiac Vibe key?
This is important so the locksmith can check if he or she has the right key blank/ transponder key/ remote key fob. Furthermore, remember to ask if the key needs to be programmed or coded, some models do – e.g., a replacement key for 2014 Pontiac Vibe will need to be programmed, whereas a 1995 Pontiac Firebird won’t.
How can I Find my Lost Pontiac keys?
Take a look at this blog post on how to find your lost Pontiac keys. In addition, if you decided to call an automotive locksmith, remember to provide the exact year, make and model, e.g “I lost my 2011 Pontiac G6 car key, 2013 Pontiac Grand Prix, 2014 Pontiac GTO, 2010 Pontiac G6” etc.
How to program a replacement key fob for a 2007 Pontiac G6?
I was just curious if anybody here has experience in reprogramming a key fob for a 2007 Pontiac G6. The car seems to have a Vehicle Theft Protection system, because it engages when I lock up the car, but it doesn’t trigger when I mess with the door handle, not sure if thats important but I’m throwing it in there.
How to program a new car key fob?
Refer to Electronic Diagnosis in Body and Chassis. Turn the ignition lock cylinder to the ACC position. Turn the ignition lock cylinder OFF, then back to ACC within 1 second. Open and then close any vehicle door. You will hear a chime when the remote control door lock receiver enters the programming/diagnostic mode.
How do you turn off the FOB on a car?
Make sure that the ignition is not in the radio mode, and do not start the engine. With the key in the ‘On’ position, press the fob’s lock button and turn the key back to the ‘Off’ position. Repeat this process at least three times, ending the cycle with the key in the ‘On’ position.
How does the keyless entry work on a Pontiac?
Press and hold the Unlock and Lock buttons on the keyless entry for approximately 15 seconds. When the chime sounds, the remote is programmed. The keyless remotes for Pontiac vehicles are not compatible with other vehicles and vice versa. The remote you are attempting to program must be specifically for the Pontiac vehicle.