How do you make a planter out of a bench?
How to Build a Planter Bench
- 1 Cut the Bench Top Pieces. Use the BLACK+DECKER 4.5 Amp Jigsaw to cut the following pieces:
- 2 Build the Bench Top Frame.
- 3 Install the Plank Braces.
- 4 Add the Bench Planks.
- 5 Build the Frames for the Bases.
- 6 Install the Legs.
- 7 Add Exterior Plywood.
- 8 Cover the Bases.
What is the best thing to line a planter box with?
Line the entire planter with a sheet of plastic, trimming it so that it reaches but does not go over the rim. Staple the plastic all the way around the rim. Using a screwdriver or sharp stick, poke through the drilled drainage holes to let excess water drain out of the plastic liner.
How much does it cost to build a planter bench?
Oblong Planter Bench Plan The total project costs around $350 and can be completed in one day. This would be a great project for beginner and intermediate level DIYers.
How do you build garden seats?
Garden seating ideas
- Choose informal dining furniture.
- Make multipurpose seating work for your outdoor space.
- Swing in style with a fashionable egg chair.
- Build a brick banquette.
- Build seating around a fire pit.
- Share the same principles of indoor furniture layouts.
- Use a quite corner to carve out a reading nook.
What can I plant in a bench planter?
Most small to medium-size plants — like ground covers, succulents, annual flowers, perennials and vines — will grow well in built-in containers, provided they’re planted in the right sun or shade exposure.
What wood to use for planter boxes?
What Type of Wood to Use. In choosing the type of wood to use for your diy wood planter box, consider natural woods, like pine, rather than plywood or pressure-treated wood, which can leach chemicals into the soil that can be harmful to your plants. Cedar and redwood are particularly suitable types of lumber to use for building planter boxes.
How thick should the wood in a planter box be?
Materials and tools for one wood planter box: Wood: 1/4″ thick plywood ( more in Step 1 ) cut to (4) 20″x20″ panels, and ( 16 ) 1″x20″ strips. Drill, 1″ flat wood screws and 1.5″ flat wood screws, a circular saw or jig saw, a couple of large Spring Metal Clamps, and bar clamps, which are my must Exterior wood glue, paint and / or outdoor sealer, brushes or paint sprayers.
How do you make concrete pots?
How to make a concrete planter: Step 1 – Cut the square dowel into four 2″ pieces for the feet. You can use a miter saw or a hand saw for this. Step 2 – On the outside box, mark the corners where the dowels will fit. (As a side note, you have to try these toffees! They are AMAZING!) Step 3 – Using an X-acto knife, cut out the marked corners.