How do you install a fuel gauge on a Harley Davidson?
If the new gauge does not come with the correct pins, you can pick them up from your local dealer. Install the gauge by routing the wires back through the tank, correctly insert the wires back into the factory plug, secure them in the right direction and order then plug in the gauge and push it into position.
Where can I get an aftermarket fuel gauge?
If you are replacing your stock gauge with an aftermarket gauge, you should use the same factory plugs and pin connectors. If the new gauge does not come with the correct pins, you can pick them up from your local dealer.
How can you tell how much gas is in a Harley Davidson?
You got a float assembly trying to measure between 0-5 gallons of gas, while the tank is bumping over bad roads and leaning left & right more than cars, not counting the vibrations? The best I could expect is to know when its full & empty, and I can tell when I fill up a tank its full & when I run out of gas I’m empty…Duh…
What’s the fuel resistance on a Harley Davidson?
As the float moves up and down with fuel level, resistance changes, resulting in a change in current to the gauge, reflected as fuel level. Low resistance for full, high resistance for empty. On mine, the manual indicates 40 ohms for full, 250 ohms for empty.
If the new gauge does not come with the correct pins, you can pick them up from your local dealer. Install the gauge by routing the wires back through the tank, correctly insert the wires back into the factory plug, secure them in the right direction and order then plug in the gauge and push it into position.
If you are replacing your stock gauge with an aftermarket gauge, you should use the same factory plugs and pin connectors. If the new gauge does not come with the correct pins, you can pick them up from your local dealer.
What happens if you pick the wrong PIN on a Harley Davidson?
The wrong style/size pick will damage the pins and render them unusable. Take care when pulling the wires through their solid tube/channel within the tank. You may need to stagger the pins in order to pull them through safely. If you have a lot of resistance or feel like you have to pull hard on the harness, stop and reevaluate. Something is wrong.
Is the fuel cap the same as the flush gauge?
This Flush-Mount Fuel Cap and Gauge Kit offers a pop-up filler design that when installed and sealed looks identical to the flush gauge. Emphasize the long and lean look of the fuel tank. This Flush-Mount Fuel Cap and Gauge Kit offers a pop-up filler design that when installed and sealed looks identical to the flush gauge.
What should I do if my fuel gauge reads Full?
When reinstalling the tank plate tighten lightly all screws starting in the middle and working left right left right etc. Do not overtighten (18 to 25 inch lbs) these screws or you can strip the tank hole.
How does the fuel cap work on a Harley Davidson?
Emphasize the long and lean look of the fuel tank. This Flush-Mount Fuel Cap and Gauge Kit offers a pop-up filler design that when installed and sealed looks identical to the flush gauge. A simple push and the fuel filler cap pops up to provide ample grip, even while wearing gloves.
This Flush-Mount Fuel Cap and Gauge Kit offers a pop-up filler design that when installed and sealed looks identical to the flush gauge. Emphasize the long and lean look of the fuel tank. This Flush-Mount Fuel Cap and Gauge Kit offers a pop-up filler design that when installed and sealed looks identical to the flush gauge.
How many fuel gauges are left in triumph?
. Only 8 left in stock (more on the way). . Only 10 left in stock (more on the way). Screw In Gas Cap With Fuel Gauge FOR Harley-Davidson,Triumph.