How do you dry car wires?
Blow the switch out with compressed air. Use a can of compressed air to push as much moisture out of the switch as possible. It will dry the switch quickly, which means water will not sit in the contacts, causing corrosion.
What to do when you leave your car windows down and it rains?
Mix eight parts white vinegar to two parts water in a spray bottle and spray over the surface until its very damp. Let the solution sit for 15 minutes, then use a wet/dry vacuum to speed up the drying process. Vinegar works great on rusty tools, too!
Why does my drivers side window not work?
A smaller version of GM’s rebirth of the Hummer. Hard to start yesterday,drivers side window,power door locks wont work,either by buttons on both doors or on key fob.Other windows work! Replaced Battery checked door lock fuse,still no drivers side window or door locks. Answered! View the answer I have this problem too Is this a good question?
Why does my driver side door lock not work?
The windows and the locks are on two separate circuits. The only part that these two have in common is the master switch. Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact.
How to re-connect power door lock and driver side power window?
Re-connect door window controller and locks wiring harness 5. Place the key in the ignition and turn to the run position 6. Connect Battery starting with the negative cable (ensuring not to connect then disconnect, (one swift motion)
Why is the cowl not connecting to the driver side door?
Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact. Also check that you have good and tight positive and negative battery cable connection to the battery posts.
A smaller version of GM’s rebirth of the Hummer. Hard to start yesterday,drivers side window,power door locks wont work,either by buttons on both doors or on key fob.Other windows work! Replaced Battery checked door lock fuse,still no drivers side window or door locks. Answered! View the answer I have this problem too Is this a good question?
The windows and the locks are on two separate circuits. The only part that these two have in common is the master switch. Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact.
Of course it is also possible that the wiring harness between the driver side door and cowl is corroded and that some of the pins are to corroded or even broken off and do not make contact. Also check that you have good and tight positive and negative battery cable connection to the battery posts.
Re-connect door window controller and locks wiring harness 5. Place the key in the ignition and turn to the run position 6. Connect Battery starting with the negative cable (ensuring not to connect then disconnect, (one swift motion)