How do you clear the fault code on a Toyota electric forklift?
Toyota forklift maintenance reset
- Press and hold buttons B and D simultaneously for 2 seconds. A short beep should sound both at the beginning of the 2 seconds and after 2 seconds has passed.
- Press button C within 10 seconds.
- Within 10 seconds, press and hold buttons B and D simultaneously for 2 seconds.
How do you clear the codes on a Nissan Forklift?
To erase your Nissan forklift codes, the repairs must first be made. Following the necessary repairs, return to Diagnostic Mode. Hold the accelerator down for a minimum of 10 seconds, then release the accelerator and the Nissan forklift codes should be erased.
How do you clear the code on a Yale forklift?
The only way to resolve those codes is with the dealer’s service software.
- Start the stopwatch and turn the forklift key switch on simultaneously.
- Wait 3 seconds, then press the accelerator pedal five times in quick succession, ending the set of five with the pedal fully released.
How do you clear the code on a Caterpillar forklift?
Press and hold the accelerator for 10 seconds or more. Doing so erases the results of the self-diagnostic test, successfully clearing the forklift codes.
What does E32 mean on a forklift?
How to clear forklift error code: Caterpillar K21 and K25 Nissan engine
| ERROR CODE | EXPLANATION |
|---|---|
| E31 | Electronic control throttle control errorlsignal |
| E32 | Overheat signal (STEP 1) |
| E33 | Overheat signal (STEP 2) |
| E34 | Spark system error signal |
How do you clear CAT engine codes?
Logged Codes can be erased simply by a technician using Cat ET. Logged Events – these are Events that affect the health of the engine, such as low oil pressure or high coolant temperature. The technician can erase them with ET but he needs factory passwords to do it. This is usually done when the engine is overhauled.
How do you clear Komatsu Forklift error codes?
To erase your Nissan forklift codes, the repairs must first be made….
- Turn the forklift key switch on while simultaneously starting the stopwatch.
- Wait for 3 seconds, then proceed to press the forklift accelerator 5 times within 5 seconds.
How do you clear the code on a Mitsubishi forklift?
- Start the stopwatch and turn the forklift key switch on simultaneously.
- Wait 3 seconds, then press the forklift accelerator five times in.
- Wait 7 seconds, then press and hold the accelerator for 10 seconds or more until the malfunction indication light starts flashing.
- Immediately release the accelerator pedal.
Where do I find the error code on my Toyota forklift?
Here the display method using the hour meter and tilt lever is described. (1) From the main menu, display the diagnosis memory menu. For how to display the main menu, refer to page 18-30. (2) A diagnosis No. and error code are displayed each time the knob switch is pressed and released.
When does a Toyota engine have a trouble code?
This trouble code is usually triggered when the O2 sensor in position bank 1, sensor 1 is bad or has faulty wiring. Replacing the sensor will almost always get rid of the code.
What does P0300 mean on a Toyota ECM?
When this code is present in your ECM, your vehicle’s computer has detected that not all cylinders are firing as they should. P0300 indicated a random, or multiple misfires. A misfire code can be triggered due to: This code indicates that a misfire has been detected on engine cylinder 1. Here are the possible causes:
What does the code p0125 mean on a Toyota engine?
If no information is coming from the sensor after the engine is warmed up, this will trigger the code P0125. Possible causes include low coolant, stuck or bad thermostat, or faulty sensor.