How do you change the transmission fluid on a 2005 Toyota Camry?
Pour 2.8 quarts of the automatic transmission fluid into the funnel. Give the fluid a couple of minutes to run down into the transmission. Remove the funnel and reinsert the dipstick. Crank the engine and check the transmission fluid while the engine is running.
Do all cars have a transmission drain plug?
Most transmission pans, however, don’t have plugs. The only way to drain the old ATF is to remove the entire pan. Before you do, place a large catch pan under the transmission pan. Then, begin loosening the bolts that attach the pan to the transmission.
What is drain plug for Toyota transmission oil pan?
M12x1.25 is the oil pan drain plug. By design, there are magnets are located in the bottom of the pan that do an excellent job of trapping the metal. Yep, no need for a magnetic drain pan.
How much ATF can you drain in a Toyota?
If you should remove the overflow plug now, have a pan ready as fluid will spill. Place your drain pan underneath the transmission fluid pan and remove the 14mm drain plug. You may want to gather the “used” ATF so you can measure exactly what had been drained – in my case it turned out to be 2.9 liters (3.0 quarts).
How big is the drain plug on a Toyota?
Also, a good scraper and some transmission rated sealant, which is good for keeping the gasket in place while re-installing the pan. Torque spec for the drain plug is 36 ft. lbs and the pan bolts are 43 in. lbs. I just did a drain and fill and notice the drain plug isn’t magnetic.
How do you change transmission fluid in a Camry?
The transmission drain plug has a 3/8-inch square hole in the center of the plug for the 3/8-inch ratchet. Slide the fluid catch pan under the transmission drain plug. Insert the square part of the 3/8-inch ratchet into the center of the drain plug. Turn the drain plug counterclockwise to loosen the plug.