How do you change the radiator on a Jeep Liberty?
Replacement clamps can be purchased from any Jeep parts department. Connect the power steering cooler lines to the radiator and tighten them using a wrench. The lines need to be tight enough to prevent leaks, but do not over-tighten them or you may strip the fitting. Install the cooling fan and replace the grill on the front of your Liberty.
How much does it cost to fix a jeep radiator?
Know what price you should pay to get your vehicle fixed. The average cost for a Jeep Liberty radiator replacement is between $399 and $486. Labor costs are estimated between $112 and $143 while parts are priced between $287 and $343. Estimate does not include taxes and fees.
How do you replace the radiator hose on a Jeep Cherokee?
Attach the upper and lower radiator hoses to the radiator and reinstall the original hose clamps if they are in good condition. If the original clamps were damaged when you removed them, then replace them with new ones. Replacement clamps can be purchased from any Jeep parts department.
How much does it cost to fix a Jeep Liberty?
Labor costs are estimated between $165 and $209 while parts are priced at $313. This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed. This range is based on the number and age of Jeep Liberty’s on the road.
How to replace the radiator on a Jeep Liberty?
Replace Liberty Radiator – Part 1 of a 2-part series showing how to remove and replace the radiator in a 2002 – 2007 Jeep Liberty. This particular model has a 3.7L V6 and is 4WD, but the same basic method applies to all models in this year-range. Part 1 covers removal, part 2 covers installation.
Know what price you should pay to get your vehicle fixed. The average cost for a Jeep Liberty radiator replacement is between $399 and $486. Labor costs are estimated between $112 and $143 while parts are priced between $287 and $343. Estimate does not include taxes and fees.
Attach the upper and lower radiator hoses to the radiator and reinstall the original hose clamps if they are in good condition. If the original clamps were damaged when you removed them, then replace them with new ones. Replacement clamps can be purchased from any Jeep parts department.
Labor costs are estimated between $165 and $209 while parts are priced at $313. This range does not include taxes and fees, and does not factor in your specific model year or unique location. Related repairs may also be needed. This range is based on the number and age of Jeep Liberty’s on the road.
What should I do when I replace my radiator?
With all the hoses and bolts attached, fill the new radiator with coolant. Check oil and transmission fluid levels in case any was lost during the installation. This is an excellent time to flush your coolant system and replace the old coolant with new coolant.
What do you do when the radiator cap is removed?
Once the cap is removed, you can either open the petcock valve or remove the bottom radiator hose to drain the coolant. Drain the coolant into a plastic reservoir. With the coolant drained, you can start removing hoses, clamps and the radiator bolts keeping the radiator in place.
What’s the best way to replace a radiator?
Set the new radiator in place, and then reattach all the previously removed parts. Start with the radiator mounting bolts and finish with the radiator reservoir hose. Check that the petcock is closed and that all other valves and caps on the new radiator are shut.
Once the cap is removed, you can either open the petcock valve or remove the bottom radiator hose to drain the coolant. Drain the coolant into a plastic reservoir. With the coolant drained, you can start removing hoses, clamps and the radiator bolts keeping the radiator in place.
Can a car jack be used to replace a radiator?
You’ll need to raise the vehicle so you can access your radiator. You can use a car jack and stands to keep the vehicle up, but remember to put a chock behind the wheels and engage the parking brake. Wait until the engine is cold before proceeding. This job can be dangerous, so be extra careful.
Is it safe to flush and fill a radiator?
Unless the coolant was recently replaced, we highly recommend performing a flush and fill. The old, drained coolant can become contaminated with debris or transmission fluid during the process of replacing the radiator, and its a safe bet to just flush and install new coolant. Use distilled water for mixing and adding to the cooling system.