How do you change the belt on a Honda tensioner?
Install the new belt around all the pulleys except the tensioner. Rotate the tensioner counterclockwise with your breaker bar and socket again, and then slide the belt onto the tensioner pulley. Rotate the tensioner clockwise to tighten the belt. Remove the breaker bar and socket from the tensioner.
How do you change the serpentine belt on a Honda Accord?
The tensioner pulley is the one on the left with an arrow pointing toward it. We will release the tension on this pulley, then slide the old belt off. To release the tension on the tensioner pulley, put a 14mm wrench onto the nut-head on the tensioner pulley (A), and pull the wrench toward the front of the car as shown.
How do you replace the serpentine belt on a Honda Odyssey?
How to Replace the Serpentine Belt in a Honda Odyssey Open the hood of your Honda and locate the negative battery cable on the battery. Loosen the clamp bolt on the battery cable end with a wrench and then remove the cable from the battery. Locate the automatic belt tensioner on the front of the engine.
How do you remove tension from a serpentine belt?
Note: It is a very heavy spring tension, and pivoting the tensioner is often not possible with a short handled tool. Hold the tension from the belt, and slip the belt off the auto tensioner pulley to remove the belt and pulley system. Slowly release the tension to avoid damage or injury, and then remove the tool from the belt auto tensioner.
How much does it cost to replace a belt tensioner on a Honda?
Upfront and transparent pricing. Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Honda Accord Drive Belt Tensioner Replacement costs $211 on average. What is the Drive Belt Tensioner all about?
What to do if your drive belt tensioner is faulty?
Check for any noise in the engine (usually a squeaky or grinding noise). Remove the drive belt (s) (in most cases). Inspect drive belt pulleys. Check the drive belt tensioner. Remove and replace the tensioner if faulty. Start car to see if noise is gone. Your drive belt tensioner should always be inspected when your drive belt is serviced.
The tensioner pulley is the one on the left with an arrow pointing toward it. We will release the tension on this pulley, then slide the old belt off. To release the tension on the tensioner pulley, put a 14mm wrench onto the nut-head on the tensioner pulley (A), and pull the wrench toward the front of the car as shown.
When to replace a serpentine belt tensioner?
Repair Topics > Belts Serpentine & Timing > When to replace serpentine… Let’s get this straight from the get-go, a serpentine belt tensioner doesn’t last the life of the vehicle. In fact, most start to show serious wear right around the 100K mile mark. You may think a worn tensioner just means your belt loses tension; you’d be wrong.