How do you change gears on a Jeep Liberty?
Shift the transmission back into gear and slowly accelerate. Do not drive your Jeep over 25 miles per hour in low range, or you will damage the transfer case. Shifting back up through the gears is the reverse of the procedure in the preceding steps. “Jeep Liberty Owners Manual”; The Chrysler Group; 2004
How to troubleshoot a Jeep Liberty’s transmission?
The main drive gear bearing or countershaft also may be damaged. Check for noise in a particular gear. This indicates worn, damaged or chipped gear teeth. The synchronizer for the gear may also be worn or damaged. Drive the vehicle and check for slippage in high gears.
What causes gears to chatter in Jeep Liberty?
Insufficient gear oil due to a leak can cause the gears to chatter. Check the transmission oil seal or vehicle speed sensor O-ring. Drive the vehicle and check for gear slippage, noise or no drive in forward or reverse gears. Lack of automatic transmission fluid can cause these issues.
Can a Jeep Liberty be switched to 4 wheel drive?
The Jeep Liberty is equipped a 4-speed, four-wheel drive system called “Command –Trac.” The system provides two-wheel drive, neutral, four-wheel drive high range and four-wheel drive low range positions. Shifting the Jeep into four-wheel drive may become necessary on slippery or icy roads, and switching between the …
How to shift into neutral on a Jeep Liberty?
Bring the vehicle to a complete stop and shift the transmission to PARK. 2. Turn OFF the ignition. 3. Turn the ignition switch to the ON/RUN position, but do not start the engine. 4. Press and hold the brake pedal. 5. Shift the transmission into NEUTRAL.
What kind of transmission does a Jeep Liberty have?
There are two versions of the Liberty. The KJ series which was produced from 2002 to 2004, and the KK series introduced in 2005 to the present. There are four wheel drive models and two wheel drive models. Two types of transmissions are available for the Jeep Liberty, a five speed manual transmission, and a 4 speed automatic.
Insufficient gear oil due to a leak can cause the gears to chatter. Check the transmission oil seal or vehicle speed sensor O-ring. Drive the vehicle and check for gear slippage, noise or no drive in forward or reverse gears. Lack of automatic transmission fluid can cause these issues.
What happens when you shift into reverse on a jeep?
Drove home two miutes away and pulled into driveway, foot on brake, shifted into neutral and then into reverse – died. No engine codes but engine light is still flashing 11 times with key on (not running).