How do you change a brake light on a Kia Optima?
How To Replace Brake Light Bulbs on a KIA Optima
- Open the hood and locate the battery.
- Open the trunk and pull back the carpet near the tail light assembly.
- Remove the three nuts holding the lamp assembly in place and pull the lamp assembly out.
How to change the tail light bulb on a Kia Optima?
How to change a burnt out brake, turn signal or reverse bulb in the tail lights of a 3rd generation 2011 to 2015 Kia Optima.
How do you replace a brake light bulb?
Pull the brake light socket straight out of the housing. Push the old bulb down in to the socket and rotate it 1/4 turn counter clockwise before pulling it straight out. Push a new # 1157 dual filament brake light bulb down in to the socket and rotate it 1/4 turn clockwise to secure it in place.
What do I need to change tail light bulb?
No tools are needed to change a standard incandescent brake, rear turn signal or side marker bulb. To replace the parking light and reverse bulbs inside the inner tail light housing, you’ll need a Phillips head screwdriver, a 10mm socket and a 1/4″ drive ratchet.
How to replace 3rd brake light on Kia Optima?
I’m trying to replace a burned out bulb on the 3rd brake light in a 2007 Kia Optima. After a few futile attempts, I gave up and called Kia. Apparently, you have to remove the entire back panel to get to the light, but they won’t share the secret as to how.
What are the bulb numbers on Kia Optima?
Replacement bulbs with their part numbers are as follows: Brake # 1157, Turn Signal # 1156 or 2357A, Side Marker # 168, Parking Light # 1156 or 2357A and Reverse # 921. The bulbs vary depending on the model year.
Where are the tail lights on a Kia Optima?
The outer tail light housings on each rear corner of the vehicle contain the brake, rear turn signal and rear side marker bulbs. Move to the inside corner of the trunk and pull off the rectangular access cover on the carpeted liner. Pull the white plastic power connector off its mounting peg and move it out of the way.
Pull the brake light socket straight out of the housing. Push the old bulb down in to the socket and rotate it 1/4 turn counter clockwise before pulling it straight out. Push a new # 1157 dual filament brake light bulb down in to the socket and rotate it 1/4 turn clockwise to secure it in place.