How do you adjust the throttle cable on a Mercruiser?
Grab the end of the lower cable where you just removed it from the stud and pull. While pulling, turn the propeller clockwise. The throttle now is in full reverse position. Move the lower cable up and down until it fits in the slot between the studs.
How do you adjust the throttle valve cable?
Tip: Consult the owner’s manual for any specifications for your car’s make and model. Adjust the cable by a small increment then have your helper press the gas pedal all the way down and check the cable at WOT. Lengthening the cable will allow the vehicle to shift earlier and the shift will be softer.
Is the idle on a Jeep Cherokee adjustable?
Idle is adjustable on 1984-1986 carburetor-equipped models of the Jeep Cherokee. On 1987 and later fuel-injected Cherokee models, idle is controlled by the engine control computer and is not adjustable as part of routine tune-up and maintenance.
What happens when the throttle valve cable is out of specification?
When the throttle valve cable is out of specification, the transmission can shift early, shift late or not shift at all. Before the throttle valve cable can be adjusted, the transmission must be in good working order. First, you will need to find out if the transmission is faulty or if the transmission just needs to be adjusted.
Where do you find the throttle linkage on a Honda Accord?
Step 2: Locate the throttle linkage. Before you can make any adjustments, you will need to locate the throttle valve adjustment location and the throttle linkage. Pop the hood and look for the intake piping. Follow the piping to the intake itself. You will find a series of linkages and cables mounted on the intake.
Tip: Consult the owner’s manual for any specifications for your car’s make and model. Adjust the cable by a small increment then have your helper press the gas pedal all the way down and check the cable at WOT. Lengthening the cable will allow the vehicle to shift earlier and the shift will be softer.
Idle is adjustable on 1984-1986 carburetor-equipped models of the Jeep Cherokee. On 1987 and later fuel-injected Cherokee models, idle is controlled by the engine control computer and is not adjustable as part of routine tune-up and maintenance.
When the throttle valve cable is out of specification, the transmission can shift early, shift late or not shift at all. Before the throttle valve cable can be adjusted, the transmission must be in good working order. First, you will need to find out if the transmission is faulty or if the transmission just needs to be adjusted.
Step 2: Locate the throttle linkage. Before you can make any adjustments, you will need to locate the throttle valve adjustment location and the throttle linkage. Pop the hood and look for the intake piping. Follow the piping to the intake itself. You will find a series of linkages and cables mounted on the intake.