How do you adjust the parking brake on a 2007 Nissan Altima?
Adjustment
- Fully engage the control lever.
- Loosen the parking brake cable adjusting nut and fully release the control lever.
- Adjust clearance of the rear parking brake shoes.
- Depress the brake pedal fully more than five times.
- Make sure that no drag exists while rotating the rear wheel and tires.
How do you adjust the parking brake on a Nissan?
Its a two step process: 1. Fully engage the control lever. 2. Loosen the parking brake cable adjusting nut and fully release the control lever. 3. Adjust clearance of the rear parking brake shoes. Refer to PB- 6, “SHOE CLEARANCE ADJUSTMENT” . 4. Depress the brake pedal fully more than five times. 5.
How to change the disc brake on a Nissan Altima?
Remove adjuster hole plug installed on the disc rotor. Turn the adjuster in direction (A) using a suitable tool or a flat-bladed screwdriver as shown, until disc rotor is locked.
Can a worn parking brake cable be a hazard?
A worn or seized parking brake cable can be a hazard. If your parking brake will not hold the car is may need to be adjusted, or the cables might need to be replaced. Today I will show you how to replace and properly adjust the parking brake cables. SK Professional Tools X-Frame Ratcheting Wrench ~ https://sktools.com/shop/catalogsearc…
Where is the adjuster wheel on a Nissan club?
If you pull the brake handle up, you will see a hole and the adjusting nut is in there. You will have to remove the rear wheels and locate a little rubber plug on the drum of the brake rotor, this is where the adjuster wheel is located. They’re pretty much self-adjusting. Just pump it several times and it’ll tighten up.
How to adjust the parking brake on a Nissan Altima?
Rotate adjusting nut to adjust parking brake pedal stroke using a deep socket wrench. c. Operate parking brake pedal with a force of 294 N (30 kg-f, 66 lb-f), make sure the pedal stroke is within the specified number of notches.
Where is the parking brake adjuster on a Nissan Titan?
Locate the parking brake adjusting nut located on the bottom of the parking brake pedal, just before the pivot point of the pedal arm. The nut and bolt are both brass colored to distinguish them. Use a 10mm wrench or deep socket to turn the nut counterclockwise to loosen the cable tension.
How do you adjust the parking brake lever?
LEVER STROKE 1) Remove the console box lid. 2) Forcibly pull the parking brake lever 3 to 5 times. 3) Adjust the parking brake lever by turning adjust- er until parking brake lever stroke is set at 7 to 8 notches with operating force of 196 N (20 kgf, 44 lb). 4) Tighten the lock nut. 5) Install the console box lid.
How do you tighten the parking brake on a Nissan Frontier?
Tighten the Parking Brake Adjustment Nut inside the cab until the parking brake becomes tight with only 6 clicks of raising the parking brake. Once you have completed the adjustment, replace the calipers and wheels back on the truck. Take your truck out for a test drive.