How do you adjust the clutch on a GSXR 1000?
Major adjustment
- Turn in the adjuster 1 all the way.
- Remove the cap from the right side engine cover.
- Hold the clutch push piece 2 and loosen the lock nut 3.
- Hold the clutch push piece 2 And turn in the adjuster 4 until it stops.
- Hold the clutch push piece 2 And tighten the lock nut 3.
How do you adjust a GSXR slipper clutch?
You can adjust them through the “plug” hole in the clutch cover. Adjust one then turn the motor over a little till you can adjust the next one and so on. Or you can remove the clutch cover and do it that way.
Does a 2007 GSXR 600 have a slipper clutch?
The 600 got the slipper clutch in 2006. If you’re struggling with low speed maneuvering, get better at it.
How to fix clutch grab issues on many GSXR 1000 K1 and K2?
How to fix the Clutch grab issues that occur on many GSXR 1000 K1 & K2. By putting Kawasaki part 13089-0003 (clutch plate from 2004 ZX10R) in place of the first steel (nearest engine), the grab issue can be got rid of. When doing this you will need to measure the stack height to ensure you get it correct (47.88mm-48.06mm).
What should clutch cable play be on Suzuki GSX are 1000?
Clutch cable play should be 1 0 – 15 mm (0.4 – 0.6 In) measured at the clutch lever end. Adjust clutch cable play according to the following procedure: Turn the clutch cable adjuster 1 to provide the specified play. Turn in the adjuster 1 all the way. Remove the cap from the right side engine cover.
How to adjust the play of the clutch?
Adjust clutch cable play according to the following procedure: Turn the clutch cable adjuster 1 to provide the specified play. Turn in the adjuster 1 all the way. Remove the cap from the right side engine cover. Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops.
How do you adjust the clutch on a Honda Accord?
Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops. Hold the clutch push piece 2 And turn out the adjuster 1/2 turns. Hold the clutch push piece 2 And tighten the lock nut 3. Adjust the clutch cable play with the adjuster 1.