How do you adjust the clutch on a 2004 GSXR 1000?
Major adjustment
- Turn in the adjuster 1 all the way.
- Remove the cap from the right side engine cover.
- Hold the clutch push piece 2 and loosen the lock nut 3.
- Hold the clutch push piece 2 And turn in the adjuster 4 until it stops.
- Hold the clutch push piece 2 And tighten the lock nut 3.
How to adjust clutch on Suzuki GSX are 1000?
Remove the cap from the right side engine cover. Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops. Hold the clutch push piece 2 And turn out the adjuster 1/2 turns. Hold the clutch push piece 2 And tighten the lock nut 3.
How to adjust the play of the clutch?
Adjust clutch cable play according to the following procedure: Turn the clutch cable adjuster 1 to provide the specified play. Turn in the adjuster 1 all the way. Remove the cap from the right side engine cover. Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops.
Where is the spring washer on a Suzuki GSX are 1000?
Install the clutch push piece (13), bearing (14) and thrust washer (15) to the countershaft. thrust washer (15) is located between the pressure plate and bearing (14). Install the spring washer seat (16) and spring washer (17) onto the clutch sleeve hub correctly. Apply engine oil to the clutch drive plates.
How do you adjust the clutch on a Honda Accord?
Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops. Hold the clutch push piece 2 And turn out the adjuster 1/2 turns. Hold the clutch push piece 2 And tighten the lock nut 3. Adjust the clutch cable play with the adjuster 1.
What should clutch cable play be on Suzuki GSX are 1000?
Clutch cable play should be 1 0 – 15 mm (0.4 – 0.6 In) measured at the clutch lever end. Adjust clutch cable play according to the following procedure: Turn the clutch cable adjuster 1 to provide the specified play. Turn in the adjuster 1 all the way. Remove the cap from the right side engine cover.
Adjust clutch cable play according to the following procedure: Turn the clutch cable adjuster 1 to provide the specified play. Turn in the adjuster 1 all the way. Remove the cap from the right side engine cover. Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops.
Hold the clutch push piece 2 and loosen the lock nut 3. Hold the clutch push piece 2 And turn in the adjuster 4 until it stops. Hold the clutch push piece 2 And turn out the adjuster 1/2 turns. Hold the clutch push piece 2 And tighten the lock nut 3. Adjust the clutch cable play with the adjuster 1.
What’s the best way to adjust a hydraulic clutch?
Your first step in adjusting a hydraulic clutch is to locate the slave-cylinder pushrod and determine if it is adjustable or not. The only way to adjust a hydraulic clutch is by adjusting the length of the slave-cylinder pushrod. If your pushrod is not adjustable, you may be able to find a suitable replacement at a junkyard that you can install.