How do you adjust a CV axle?
Let’s Get Started
- Remove the Axle Nut Cotter Pin.
- Remove the Axle Nut.
- Disconnect Ball Joint.
- Remove the Outer CV Joint.
- Match the Old CV Axle to the New Unit.
- Install the New CV Axle.
- Reconnect the Lower Ball Joint.
- Reinstall the CV Axle Nut.
How do you install a cv shaft on a quest?
If you are on the passenger side of the Quest, install the inner CV shaft end onto the axle bearing bracket and install the three mounting bolts. Tighten the mounting bolts to 60-foot-pounds of torque, using a 1/2-inch drive torque wrench and socket. Generously coat the outer end of the CV axle with bearing grease or axle grease.
What kind of engine does a Nissan Quest have?
The Nissan Quest has been a front wheel drive minivan, equipped with a variation of a V-6 engine in each production year. The Quest is produced with CV shafts, otherwise known as half shafts, stub axles, or CV axles.
When does a cv shaft need to be replaced?
Excessive vibration from failing CV shafts can interfere with handling and ride characteristics, and the overall safety and comfort of the vehicle. Usually the CV axle will need to be replaced if it is damaged enough to cause vibrations. CV axles serve as the final link between the engine and the wheels.
How to remove front wheel lug nuts from Quest?
Remove the front wheel lug nuts completely from the vehicle, then remove the wheel assembly from the Quest. Remove the caliper mounting bracket bolts from behind the brake rotor, using a 3/8-inch drive ratchet and socket. Turn the caliper bracket mounting bolts counterclockwise until they are completely removed from the bracket assembly.
If you are on the passenger side of the Quest, install the inner CV shaft end onto the axle bearing bracket and install the three mounting bolts. Tighten the mounting bolts to 60-foot-pounds of torque, using a 1/2-inch drive torque wrench and socket. Generously coat the outer end of the CV axle with bearing grease or axle grease.
How to remove a cv shaft from a Nissan?
IE: no free balls, cage, and gear thing. They will all still be together inside the CV cup as an assembly. -Next, grab the shaft and clamp it in a vise with the dissembled end up (optional). Using snap ring pliers, remove the snap ring and gear thing.
The Nissan Quest has been a front wheel drive minivan, equipped with a variation of a V-6 engine in each production year. The Quest is produced with CV shafts, otherwise known as half shafts, stub axles, or CV axles.
How to install a CV joint on a Nissan?
Line up the splines and push the spindle up to its normal position. Some anti seize on the spline/threads is always good here. Install axle nut and snug it up, install the cotter pin. Re connect UCA ball joint and if OEM torque to 58 ft/lbs and replace cotter pin.