How do I setup my Linksys wireless G router?
Linksys WRT54G Wireless-G Broadband Router. Begin setup of your Linksys Wireless Router by first plugging in the power. Give it 10 seconds or so to initialize and then plug an ethernet cable into your wall jack and into the port on the back of the router marked Internet.
How do I access my Linksys wireless G router?
Go to the Address bar and enter your router’s IP Address (“192.168. 1.1” is the default IP of most Linksys routers) then press [Enter]. NOTE: If the IP address of the router has been changed, type the router’s IP address in the Address bar instead.
What is a Wireless G broadband router used for?
The Linksys WRT54G Wireless-G Broadband Router is a 3-in-1 residential gateway device. It acts as a wireless access point which lets you connect your wireless computers and devices to it without using wires.
How do I setup my 5g router Linksys?
On the Basic Wireless Settings page, look for the 5 GHz Wireless Settings category located at the left hand side and enter your new wireless network name (SSID) according to your preference. Then click on Save Settings to apply the changes.
What does Linksys Wireless G router do?
The Linksys WRT54G Wireless-G BroadBand Router is a 3-in-1 networking device that lets your whole network share a high-speed Cable or DSL Internet connection. It can act as a wireless access point, a 4-port Ethernet switch, or a router.
How do I reset my Linksys WRT54G wireless G router?
How can I reset the WRT54GS to factory defaults? Press and hold the Reset button at the router’s back panel for 30 seconds then release. Alternatively, use the web-based setup page, go to Administration tab > Factory Defaults sub-tab and click the Restore Factory Defaults button.
How do I change from 2.4 GHz to 5 GHz?
On most Android devices you can tap Settings > Connections > WiFi….
- Click on the WiFi icon in the bottom right corner of the task bar.
- Then click on the network you want to use from the list of available networks.
- Click Connect (type in the password and click Next if it’s your first time connecting to this network).
How do I set up my Linksys wireless router?
Setting up a Linksys wireless router for the first time is a two-step process: Physically setting up the router and configuring the router’s settings. Make sure you have enough Ethernet cables to connect the modem to the router and the router to your computer. Even though the router is wireless, a wired connection is must for the setup process.
Is the Linksys WRT54G obsolete?
This Linksys WRT54G was one of the best pieces of computer hardware of its day. But depending what you ask of it today, it can feel obsolete . Remember, when the Linksys WRT54G came out way back in 2002, it was pretty unusual for a household to have much more than a desktop and a laptop, and not all game consoles had network adapters standard.
What does a Linksys wireless router do?
Linksys Routers are well known for providing support for WPS security standard as they are used to handle wireless connections. Almost every model of Linksys Router comes with a WPS button.
What is a Linksys Smart Wi-Fi router?
Linksys Smart WiFi routers are accessible either via the Linksys app for Android and iOS or through a web browser. The default local IP address shared by all Linksys Smart WiFi routers is 192.168.1.1. The Linksys Smart WiFi default password is admin.