How do I reset my fuel cut off switch?
RESETTING THE SWITCH
- Turn the ignition switch OFF.
- Ensure that there is no fuel leaking in the engine compartment, along any of the lines or at the tank.
- If no leakage and/or odor is apparent, reset the switch by pushing the reset button on the top of the switch.
How can I check if my fuel pump is bad?
The fuel pump should make an audible noise if it’s working properly. Whack the fuel tank: Have an assistant crank the engine while you hit the fuel tank with a rubber mallet. If the vehicle starts during this procedure, it’s a pretty clear sign the electric motor inside the pump is bad.
Why is my fuel pump not working on my Subaru Impreza?
The dash lower panel will have to be removed to access it. Could the fuel controller have failed on a ’02 Subaru Impreza WRX, the cars check engine light comes on and gives a P1230 code after replacing the fuel pump and filter? When an engine fails to start or is sluggish, it suggests that the fuel rail lacks fuel pressure.
Where is the relay switch on a Subaru Impreza?
The fuel pump relay switch is located on the left of the dash near the kick panel. The dash lower panel will have to be removed to access it. Could the fuel controller have failed on a ’02 Subaru Impreza WRX, the cars check engine light comes on and gives a P1230 code after replacing the fuel pump and filter?
Where is the fuel pump on a Subaru?
According to the wiring diagram this indicates a possible problem with the fuel pump control module which is in the cargo area. Check the wiring between the tank and the fuel pump relay. If the wiring is at fault, power supply to the pump could be affected.
Where is the fuel pump relay switch on a Subaru Legacy 2.5 GT?
Where is the fuel pump relay switch on a Subaru Legacy 2.5 GT? The fuel pump relay switch is located on the left of the dash near the kick panel. The dash lower panel will have to be removed to access it.