How do I remove the aerial from my Nissan Note?
To get at the aerial mounting to change the aerial complete on the Note, is to lower the headlining just enough so you can work on it / change it. You will need to release the edging of the roof lining at the rear edge – and then you can carefully pull the lining down.
Can you go through car wash with an antenna?
Car Antennas: Most antennas can either be unscrewed or pushed down so they no longer protrude from the car’s exterior. They’re flexible enough to withstand the occasional automatic car wash, but it’s best if you get in the habit of removing these items before you head in.
Where was the antenna on my Nissan Micra?
Accidently forgot to remove the aerial on my wife’s Nissan Micra whilst I put it through the car wash, unfortunately she was sat next to me and witnessed the aerial fly across the forecourt when the car wash caught it and the aerial base.
How to swap the antenna on a Nissan?
Watch the videos on YouTube first to be sure you know which screws need to be removed to get access to it. Once access is achieved the swap over is simple. Be sure to clean the outside of the car around the mount hole first and ensure the rubber skirt to the base unit fits securely around the base.
Can a Nissan Almera Tino be without a sunroof?
This is a perfect replacement for the original and will be easy to fit on a car without an electronic sunroof. My Almera Tino has an electronic sunroof and getting access to the unit from inside the vehicle is a bit fiddly.
Can you put a glasses holder on the roof of an Almera?
If you have a higher spec Almera with the built in glasses holder and downlights, it’s a bit cramped for room, especially if you have large fingers. I ended up bending the inner roof lining down with pair of pliers to allow better access. Once access gained, it was quick and easy to fit. Works well, should have changed it years ago.
Where can I get a roof rack for my Nissan?
NissanPartsPlus.com has the roof racks you need to add more hauling space to your car. We’ve got all the cross bars, mounting brackets, bolts, supports, and end caps you’ll need to build the perfect roof rack.
How do you install a Nissan roof rail?
INSTALLATION PROCEDURE: 12) While aligned, install and fasten T-30 torx bolt (D) and Rear crossbar assembly (B) to roof rail mounting location as shown in Fig. 27. Using Torque wrench, tighten fasteners to 4.1 – 6.2 ft-lbs.(5.6-8.4 N-m) 13) Repeat procedure on left side roof rail.
Accidently forgot to remove the aerial on my wife’s Nissan Micra whilst I put it through the car wash, unfortunately she was sat next to me and witnessed the aerial fly across the forecourt when the car wash caught it and the aerial base.
How do you install a Nissan Leaf roof?
INSTALLATION PROCEDURE: 1) Removal of roof rail moldings. a) b) c) See Fig. 3. Using T30 torx driver, remove four M6 machine screws. Using trim stick, carefully remove front and rear roof rail covers. Do not discard rail covers. Store rail covers in poly bag provided in kit.