How do I remove and replace baseboard trim?
How to Remove Baseboards
- Tools You’ll Need for Baseboard Removal:
- Step 1: Prep the Baseboards.
- Step 2: Double-Check the Cut of the Inside Corners.
- Step 3: Start Loosening the Baseboards.
- Step 4: Pull the Boards From the Wall.
- Step 5: Remove Any Nails Left in the Trim.
- Step 6: Number Each Board.
Do you need a nail gun for trim?
Installing it is as simple as buying a box of itty-bitty finishing nails and hammering in the molding. Seriously, you do not even need a nail gun. Here’s the whole step-by-step for how to install baseboards and crown molding—note that most of the work happens in the planning phase.
What’s the best way to replace a door trim?
Replacing a door trim involves removing the old one, cutting your new trim to the right size, and nailing it to the doorjamb. Start by cutting the caulk from your door trim with a utility knife. Then, use a pry bar to remove each side of the trim.
How to install vinyl door trim on an exterior door?
Installing vinyl door trim (brickmold) on the exterior door. Follow along as I show you detailed step by step instructions on how to replace your worn out and weathered exterior wood trim and replace it with new maintenance free vinyl pvc trim (brick mold) NO MORE SCRAPING AND PAINTING!
How do you remove line from a trimmer?
When there are about 5” or 6” of line remaining, snap it into the retainer on the spool to hold it in place. Line up the retainer with the slot on the outside of the head. Replace the spool into the trimmer head. Remove the line from the retainer, and pull it through the slot to make sure it is feeding smoothly.
Can a miter saw be used to replace door trim?
Door trim, especially wood trim exposed to the weather, can rot and become damaged over time. It’s not too difficult to replace, but you do need to be able to use a miter saw. The old trim is easy to pull off with a pry bar.
How do you install trim on a door?
Installing the New Trim Position the trim against the wall. Nail the side trim in place. Drill and nail the header in place. Pre-drill holes in the trim’s corners. Nail the trim pieces in place. Caulk the holes, joints, and edges of the trim. Sand, prime, and paint the door frame.
What’s the best way to install reglet trim?
The secret to a successful reglet-trim installation is ensuring the pieces don’t move, which can lead to cracks in the joint compound that conceals the nailing flange. It’s also important to overlap the exposed part of the reglet in corners and transitions or you’ll end up with gaps that are impossible to conceal with caulk or filler.
What’s the best way to replace window trim?
Trim around windows and doors using the same corner joints found on the existing window trim. The joints may be mitered, with the mating boards cut at 45-degree angles to form a square corner, or they may be simple butt joints made with square-cut pieces.
Is it easy to remove a microwave trim kit?
If the trim kit was custom-made, it may be nailed onto the face of the cabinet with small brads. If you need to perform maintenance on your microwave or need to replace it, microwave trim kits are simple to remove and reinstall. Unplug the microwave.