How do I know if my JP drain is clogged?
The JP drain removes fluids by creating suction in the tube & will expand as it fills with fluid….When should I seek immediate care?
- If you have a cloudy yellow or brown drainage from the drain site.
- If the drainage has a bad smell or odor.
- If you JP drain breaks or comes out.
Why is JP drain not holding suction?
If JP drain is not holding suction The emptying port may not be closed securely or the bulb is not compressed enough. Please repeat steps 2, 5, and 6 from above. If bulb is still expanded, contact the office during business hours. If JP drain is pulled out or dislodged Do not attempt to re-insert the drain.
What to do when transmission fluid gushes out of dip tube?
Repair the transaxle vent restriction by replacing the transaxle vent with a 90°vent stem, small hose clamp, two (2) tie raps, and 24″ (61 cm) of 5/16″ (8 mm) vacuum hose.
What to do if you have a dip tube leak?
ALWAYS FOLLOW WORKSHOP MANUAL, SECTION 307-01 TO LOCATE THE SOURCE OF A LEAK, AND LEAK CHECK WITH BLACK LIGHT AND DYE. 1. Disconnect the mass air flow (MAF) sensor electrical connector. 2. Disconnect the crankcase vent tube (s) from the air cleaner outlet pipe.
Why is fluid coming out of my transaxle?
Some 2000-2007 Taurus, 2000-2005 Sable, 2000-2003 Windstar, and 2004-2007 Freestar/Monterey vehicles, equipped with a 4F50N, AX4N, or AX4S transaxle, may exhibit an erratic fluid level reading on the transaxle dipstick and possible leaks around the filler tube and grommet. The condition may be due to a restricted transaxle vent.
What does it mean when no brake fluid comes out?
If no brake fluid is coming out from the bleeding port in the brake caliper, it is an indicator that there is a problem. Ensure that you solve this problem before it results in danger. Here are the reasons why the brake doesn’t bleed: