How do I fix the F01 code on my Maytag dryer?
Power unit down by turning off the circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Start a time dry cycle. Monitor the dryer for one (1) minute to ensure the error code does not display again.
How do you reset the code on a Maytag dryer?
Examples of error codes for Maytag dryers include “AF,” “PF” or “F” with a number. To reset the dryer if an error code occurs, press “Power/Cancel” twice and then reselect a cycle and press “Start.”
What does code F01 mean on Maytag washer?
a obstruction in a hose
maytag washer with error code F01 means a obstruction in a hose or tube, not a control panel issue like people say.
What does F1 mean on a dryer?
Definition. The “F1” error means that the dryer’s thermistor failed. The dryer is reading the thermistor as “open” and the actual part has shorted out. The thermistor is used to read and control temperatures within the dryer. Without the part, the dryer will not operate.
Why does dryer say F1?
The Whirlpool Cabrio dryer F1 error flashes when there is a miscommunication between the control board and the rest of your machine. Move your dryer away from the wall so you can access the control panel area. There are 2 screws located in the back of the control panel.
What is L2 on Maytag dryer?
Low or No Line Voltage
An L2 (Low or No Line Voltage) Error code indicates that there may be a problem with your home power supply, keeping the dryer’s heater from turning on. The dryer will continue to run when this error code is present. Touch any pad to clear the code from the display and return to the estimated time remaining.
What does F1 mean on washer?
Usually, it’s a problem with the control board. By replacing the control board, you should be able to fix the problem. However, it might also be a problem with the hose, something might be stuck in the hose.
How do you unlock a Maytag Maxima?
How to unlock Maytag washer door? If there are no errors with the washer and no components are faulty, you can try and cancel the wash cycle, press and keep holding the CYCLE END or CANCEL button and wait a few minutes and the door should unlock on its own.
What does F01 mean on dryer display?
F01 means that your main relay control board for the dryer has an internal short inside itself. If you pull the dryer forward and remove the screws coming in from the back of the top panel, the top panel will pull straight back, up, and off.
What does F01 mean on a whirlpool duet dryer?
Whirlpool Duet Dryer F01 Error. The F01 error code means the primary control unit in the dryer has failed and will have to be replaced.
What does F01 code mean on Whirlpool electric dryer?
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. How do you run a diagnostic on a Whirlpool Duet dryer?