Menu

Navigation

How do I find the IP address of an Ingenico ipp320?

Posted on by Arif Clayton

How do I find the IP address of an Ingenico ipp320?

Press the red button to return to “Communication”. Scroll down to “Ethernet settings” and press the enter key. Scroll down to “IP Address” and press the enter key to enter your wireless network’s IP Address.

How do I install a PIN pad?

How to Install an EMV Enabled IPP350 Pin Pad

  1. Step 1: Connect your new PIN Pad. Plug the USB cable of the pin pad to the computer.
  2. Step 2: Install the device Drivers. The newly connected device should be recognized by Windows and should install the required software drivers automatically.
  3. Step 3: Test Pin Pad.

How do I reset my Ingenico PIN pad?

Try a soft reboot.

  1. Hold down the clear button and the punctuation button (below the 9 key) at the same time for 3-5 seconds, until the terminal turns off.
  2. Once off, hold the enter button until the terminal powers on.
  3. Try the transaction again.

How do I bypass an Ingenico ipp350 pin?

Override to Signature Debit:

  1. Instead of entering a PIN on the “Enter PIN” screen, press the “Yellow” key on the terminal.
  2. The terminal will ask you if you want to try without using a PIN.
  3. Select “Yes”.
  4. Ask the cardholder to remove and then reinsert their debit card.

How do I enable iPP320?

1. Power cycle the iPP320 PIN Pad. On the PIN Pad, hold down the yellow key and press the punctuation key at the same time. The iPP320 PIN Pad will beep and restart.

How do I bypass an Ingenico IPP350 pin?

How do I fix Ingenico iPP320?

The Ingenico iPP320 may have difficulty with transactions due to connection issues or initial card reader settings….Overview

  1. Reboot the reader and disable SSL.
  2. Reboot the reader, start a transaction to initialize the reader.
  3. Cancel the transaction, reboot the reader again and enable SSL.

How do I bypass an Ingenico PIN?

How do I reset my PIN pad?

On the PIN Pad, hold down the yellow key and press the punctuation key at the same time. The iPP320 PIN Pad will beep and restart.

How do I connect my Ingenico PIN pad?

Install iPP350

  1. Connect your new PIN Pad. Plug the USB cable of the PIN pad to the computer.
  2. Install the device drivers. The newly connected device should be recognized by Windows and should install the required software drivers automatically.
  3. Test PIN Pad. Go to Help, then select Hardware Troubleshooter.
Posted In Q&A