How do I check my Honda ATF level?

How do I check my Honda ATF level?

Steps to Check Transmission Fluid

1. Turn the car on. The engine should be warmed up to check the level.
2. Find the transmission fluid dipstick.
3. Remove the dipstick and touch the fluid, moving it around between your thumb and forefinger.
4. Use a rag to wipe off the dipstick.
5. Use a funnel to bring the fluid level up to full.

How do you check the transmission fluid on a 2000 Honda Passport?

Under the vehicle on the passenger side, the transmission has two plugs. The lower one is the drain plug and the upper one is the fill plug. To check the level, stick your finger in the upper hole and the fluid should be right at the edge of the bottom of the opening, with the engine running and in park position.

How do you check the fluid level in a Honda transmission?

Insert the dipstick, remove it again, and read the fluid level. The fluid level should be between the upper and lower marks. If necessary, add fluid and recheck. Use only Genuine Honda or DEXRON®II Automatic Transmission Fluid (A.T.F.) when adding or changing fluid. After checking the fluid level, replace the dipstick securely.

What kind of oil to use for transmission fluid check?

Transmission Oil/Fluid Check (cont’d) Use only SF or SG grade motor oil when adding or changing transmission oil. Use the proper viscosity oil for the climate in which you drive: Automatic. Check the automatic transmission fluid level (with the engine off and the car on level ground) with the dipstick in the right end of the transmission housing.

How to check the oil level on a 5 speed transmission?

If the oil is up to the bottom edge of the hole, the oil level is correct. If it is not, slowly add oil until it runs out of the hole, then reinstall the bolt and tighten it securely with a wrench. 5-SPEED TRANSMISSION OIL CHANGE CAPACITY: 1. 9 (1.7 Imp qt, 2.0 US qt). CORRECT LEVEL OIL CHECK FILLER BOLT Transmission Oil/Fluid Check (cont’d)

What should the fluid level be in an automatic transmission?

The fluid level should be between the upper and lower marks. If necessary, add fluid and recheck. Use only Genuine Honda or DEXRON®II Automatic Transmission Fluid (A.T.F.) when adding or changing fluid. After checking the fluid level, replace the dipstick securely. AUTOMATIC TRANSMISSION FLUID CHANGE CAPACITY: 2.4 (2.1 Imp qt, 2.5 US qt).

Insert the dipstick, remove it again, and read the fluid level. The fluid level should be between the upper and lower marks. If necessary, add fluid and recheck. Use only Genuine Honda or DEXRON®II Automatic Transmission Fluid (A.T.F.) when adding or changing fluid. After checking the fluid level, replace the dipstick securely.

Transmission Oil/Fluid Check (cont’d) Use only SF or SG grade motor oil when adding or changing transmission oil. Use the proper viscosity oil for the climate in which you drive: Automatic. Check the automatic transmission fluid level (with the engine off and the car on level ground) with the dipstick in the right end of the transmission housing.

If the oil is up to the bottom edge of the hole, the oil level is correct. If it is not, slowly add oil until it runs out of the hole, then reinstall the bolt and tighten it securely with a wrench. 5-SPEED TRANSMISSION OIL CHANGE CAPACITY: 1. 9 (1.7 Imp qt, 2.0 US qt). CORRECT LEVEL OIL CHECK FILLER BOLT Transmission Oil/Fluid Check (cont’d)

The fluid level should be between the upper and lower marks. If necessary, add fluid and recheck. Use only Genuine Honda or DEXRON®II Automatic Transmission Fluid (A.T.F.) when adding or changing fluid. After checking the fluid level, replace the dipstick securely. AUTOMATIC TRANSMISSION FLUID CHANGE CAPACITY: 2.4 (2.1 Imp qt, 2.5 US qt).