How can I reset the airbag light on my Hyundai?

You can easily reset the airbag light on your Hyundai from home using a handheld pocket scanner. These are also called code readers or code erase tools. Make sure you get the on-board diagnostics II, OBD II, code reader not the OBD I for your Hyundai.

Why does the airbag light stay on in my car?

Check the airbag switch for passenger Some cars have a “passenger seat Airbag on/off button.” This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars.

Do you clear trouble codes before resetting airbag light?

Do never clear the trouble codes before you fix the problem caused by the airbag light. Read the codes and get information about what can cause the problem and therefore continue the diagnosis. You should never just reset the airbag light without repairing the problem.

What does an illuminated airbag light mean?

All the same, the most important thing to know is that, an illuminated airbag light indicates a problem in the SRS system. This means that airbags might not deploy in the event of an accident.

What caused my airbag light to come on?

The most common cause for the airbag light coming on is that the airbag system is deactivated or turned off. There may be a few reasons for this which you had no control over. There may be an issue with the crash sensors or other airbag component.

What is causing the airbag light to come on?

A common reason air bag lights come on is because something is interfering with the seat belt switch – the sensor that detects if the belt is properly fastened – which could trigger a false warning light related to the air bags, says Robert Foster, owner of Foster’s Master Tech in Bozeman, Montana.

Why is my car’s airbag light on?

Common Causes Airbag Light on Seatbelt Not On. In many cases, the airbag light may be on simply because your seatbelt is not on. Deactivated Airbag. You may have a functional airbag that is just deactivated in the system. Airbag Backup Battery is Low. Corroded / Failure Crash Sensors. Post-Accident. Minor Accident. Failure Airbag ECU. Failure Pretensioner Seatbelt. Failure Spiral Cable.

Why does your airbag light blink off and on?

When the main battery discharges , the backup battery also discharges. This might cause the airbag light to appear. As you might have guessed, charging or replacing the battery solves this problem and the airbag light will turn off. All the same, in some vehicle models, the light might not go off even after charging the battery.

Why does the airbag light come on on a Hyundai Elantra?

Your airbag light is part of your Elantra’s larger supplemental restraint system. It works in tandem with the system to protect you in the event of an accident. If all parts of this system are not working properly, it can cause the airbag light to come on.

What to do if your airbag warning light is on?

1. To do this without a scanner, turn on your car’s electronics without turning on the car. Wait for the airbag light to turn on. 2. The light will stay on for about seven seconds then it will turn off. After it turns off, shut off the car completely and wait for three seconds.

Is it safe to drive with the airbag light on?

If your vehicles airbag has gone off and been replaced, the airbag system needs reset. It won’t just work until the airbag system has been reset by a shop, or you send the module to someone who can do it for you. Is it Safe to Drive Your Elantra with the Airbag Light On? It is not as safe to drive with the airbag light on.

How do you turn off the airbag light on a Hyundai?

Turn on the code reader and move the arrows on the menu to the “Erase” function and then press “Enter”. Remove the OBD II code reader from the DLC and start the engine. Look at the instrument panel to make sure the airbag light turned off.

How to turn on the airbag warning light?

If the sensor mat isn’t working properly, trouble codes B1447 and B1448 can set and turn on the Airbag warning light Start by disconnecting the battery terminal from your car battery. Wait for at least 3 minutes for the airbag system to power down. Clear everything from the under the passenger seat.

How to check the B1448 airbag light on Hyundai Accent?

If the code is still there. unplug the six terminal connector going to the sensor mat under the passenger seat. Reconnect the battery. With the key in the RUN position check for battery voltage on terminal 1 (red/black wire) and ground terminals 3 & 5 (black wires). Next, check the voltage at terminal 2 in the connector (red/black) wire.

Why is my airbag light on in my Camry?

Here’s how to diagnose and fix it without the risk of near-face explosions. The work performed is on a 2004 Toyota Camry. Other cars may be different, but this represents a common case of why airbag lights may be illuminated. When working on an airbag system, exercise extreme caution.

What to do if your airbag light is not working?

Spray the connector plugs with an electronic cleaner and restart your car. If you can not find any problems there, you should really get an OBD2 scanner or let a workshop read the codes; otherwise, you will just guess the problem out of the dark. Founder, owner & main author of Mechanic Base.

How to fix your airbag SRS warning light?

A no cost easy way to reset and fix your airbag SRS warning light. Tsukasa Azuma is an awesome car blogger of Car From Japan. He owns a car repair shop at downtown Osaka, and he put all that experience to good use in his sharing posts.

When does the air bag light stop flashing?

The light will flash for exactly seven seconds. Once it is off, you have to turn off the ignition within a second. Turn the ignition on again after three seconds. Repeat this process for two or three times and the airbag light will stop flashing. This is the time you’ll know that it is reset. (Part 1) How To Fix Airbag Light – Fast & Easy!

Why does my Hyundai Sonata airbag light come on?

An airbag module is the brains of your cars Supplemental Restraint System, also known as the SRS. It uses the sensors in your Hyundai to determine what action is necessary when your vehicle has been in an accident or collision. There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts.

Why do I need to Reset my airbag light?

If you answered yes to any of these questions, you may be in need to have your airbag light or module repaired or reset. An airbag module is the brains of your cars Supplemental Restraint System, also known as the SRS. It uses the sensors in your Hyundai to determine what action is necessary when your vehicle has been in an accident or collision.

A no cost easy way to reset and fix your airbag SRS warning light. Perform this with the ignition key in the off position. Please subscribe, like and comment. You might also like to watch https://youtu.be/yMXm5IVQW9A Loading…

How long does the airbag light stay on?

To start the process get your watch ready and turn the ignition switch from “Off” to “On.” Once the airbag light comes on it will stay on for a total of seven seconds. Once it turns off, you will have a second to turn the ignition back to “Off.” After you have the ignition off for three seconds, you will need to turn the key back “On.”

How do you turn off the airbag light?

Put the key into the ignition and turn the switch to the “on” position. Watch for the airbag light to turn on. It will stay illuminated for seven seconds and then shut itself off. After it shuts off, immediately turn the switch off and wait three seconds.

When does the SRS airbag light light up?

The SRS light can also light up if the vehicle has been in an accident recently. If someone jerks on a seat belt or if the Hyundai breaks suddenly, the airbag module determines that the seat belts need to lock and tighten.

Where is the diagnostic plug on a Hyundai?

Find the diagnostic-link connector underneath the driver’s side of the car on the dashboard. Examine the shape of this receptive port and then compare it to your OBD II code reader to make sure the plug will fit into the connector. If the shapes match, plug the reader into the DLC.

What to do if your airbag light never comes on?

if it never comes on, check the fuse. if it comes on, blinks like 5 times and shuts off (aka self testing), and never comes back on, then your SRS is operating correctly. if it never blinks, and just stays on all the time, then you have a hard code. you will have to take it to a shop to get diagnosed and turned off.

Is there a fuse for the air bag indicator?

There are two fuses, one for the air bag indicator, and the other for the air bags. I have heard that pulling the “air bag ind” fuse will not affect whether or not the actual air bags will go off in a crash, and it sure is nice not to see that “air bag” light on the dash.

Is there a problem with the Hyundai Accent air bag light?

See all problems of the 2010 Hyundai Accent . Takata recall: air bag light stays on and car cannot be inspected. Also check engine light stays on. Removed passenger and driver seats to check sensors/wires but did not solve the problem.

What is the trouble code on a Hyundai Accent?

It is impossible to troubleshoot and airbag system without the trouble code. Trouble code B1448 is a common airbag trouble code on Hyundai Accent vehicles. What is a B1448 trouble code? Codes B1447 and B1448 are related to the Occupant Classification System (OCS). The OCS is used to determine whether a child or an adult is in the passenger seat.

What happens if you reset the airbag light?

You should never just reset the airbag light without repairing the problem. This can deploy the airbags or non-functioning if an accident occurs. Let a professional replace the airbag’s parts if you are not sure of how to do it. Remember always to remove the battery connection when working with airbags.

Where is the button to turn off the airbag light?

This is the first thing you should check when you want to remove the airbag light. Maybe someone before you turned it to Off by mistake, which will make the airbag light stay on in most cars. This button is usually on the dashboard on the passenger side, and you may see it if you open the passenger door or the glove box.

Do you need scanner to read airbag trouble codes?

Working with your airbag system is crucial, and therefore, always read the trouble codes with an OBD2 scanner to get an idea of where to start your troubleshooting. Do never clear the trouble codes before you fix the problem caused by the airbag light.

Where are the airbag codes stored in a Hyundai?

Below you will find common airbag codes that can be stored in your airbag control module after your vehicle was in an accident. The best part of having your Hyundai’s original airbag module reset by MyAirbags is that when you get your airbag control module back and it goes back into the same vehicle that it came out of then it will be plug-n-play.

Why do I need to reset my Honda airbag module?

Even after a minor accident the airbag may not deploy but the seat belts will lock and airbag module will need to be reset because of crash data and crash codes that are stored in the airbag module. MyAirbags will reset your airbag control module back to its original manufacturer state clear of all codes, both soft and hard codes.

How to reset the SRS # airbag light?

How to Reset SRS #Airbag Light Turn off the SRS. – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.

Why does my airbag light keep coming on?

There are a few reasons why the airbag light may come on. It may indicate that there is a problem with your seat belts. Another issue could be water damage to the sensors. The SRS light can also light up if the vehicle has been in an accident recently.

What makes the airbag warning light turn on?

Naturally, these can become faulty, which would cause the airbag light to illuminate. The two most common kinds of airbag warning lights are the letters ‘SRS’, or an image of a man with a seatbelt on and a deployed airbag in front of him. Typically, these are either yellow or red, and stay illuminated.

Where is the airbag light on Hyundai Elantra?

Either at the sensors (front of car on or near the radiator support) or at the clock spring (in the steering column). With this light on steady your airbag(s) will NOT deploy. Even if you’re in a collision.

How do you know if your airbag sensor is at fault?

The way you know if the sensor is at fault or not, before scanning your airbag system for faults, is to simply look at the “Passenger Airbag Off” light. If there’s no one in the seat, the light should illuminate.

Why does my airbag warning light keep coming on?

There are many different reasons that can cause your airbag light to flash or stay on. Just like troubleshooting your check engine light (get more details on how to reset check engine light here ), fixing your airbag warning light can be challenging sometimes and should never be ignored.

What do the warning lights on a Hyundai mean?

This light reminds the driver that at least one person in the vehicle is not wearing the seat belt. This light means that there is a problem with the ABS and electronic brakes. Stop immediately and consult an auto mechanic. This light means that you are running out of fuel. Stop at a gas station as soon as possible, or you will run out of fuel.

Why does the airbag light stay on in a Hyundai i20?

If you’ve been in an accident, the airbag light is going to stay on until the system has been restored. It will not work until repaired. Here are some common reasons that your i20’s airbag light could come on. 1. Seat Belts Safety belts are still the most important safety feature in the event your i20 crashes.

If all parts of this system are not working properly, it can cause the airbag light to come on. If you’ve been in an accident, the airbag light is going to stay on until the system has been restored. It will not work until repaired. Here are some common reasons that your i20’s airbag light could come on. 1. Seat Belts

It is not as safeto drive with the airbag light on. The airbag system has saved countless lives since its invention. If you do drive with your i20’s airbag light on, you are relying solely on the safety belts to keep you safe, which is not as safe.

Is the air bag light on in my Hyundai Sonata?

Hyundai Sonata: Air bag light is on in my 2007 hyundai sonata. Hyundai Santa Fe: I have a 2008 Hyundai Santa Fe. The air bag I have a 2008 Hyundai Santa Fe. The air bag light has been on – now believe electrical problem. Car has turned on parking lights by itself.

What to do if your airbag light has gone away?

Reset the airbag light and make sure that it disappeared from the dashboard. If it is still there – reread the codes and check for any trouble codes. Restart your car & test-drive. If the airbag light seems to have gone away from your dashboard – restart your ignition and go for a test drive.

When does the airbag light turn on without a scanner?

Some cars have a “passenger seat Airbag on/off button.” This is the first airbag light you should check when you want to remove the airbag light without a scanner. If the light is functioning well, it should turn on when someone occupies the passenger seat.

Navigation