How can I find out if my battery drain is faulty?
To locate the faulty circuit, start pulling out fuses, one at a time, from each of your vehicle’s fuse boxes. Begin with the under-hood fuse box, if there’s one. Pull one of the fuses and watch your meter’s reading.
Where can I get an amperage battery drain test?
However, your local public library may have a copy of the manual in the reference section as well. The amperage battery drain test requires disconnecting one of the battery cables. If your car radio or alarm system needs a code to reactivate it after cutting battery power, make sure you know the code to turn it back on.
How to check for battery drain with multimeter?
Go to the fuse panel located usually under the steering wheel of your car. Each car may be different though. Start by pulling out one fuse (best to start in a certain order and not to just do it randomly). Complete the steps above. If your battery still has battery drain, then it was not due to items on that fuse.
How to diagnose a parasitic battery drain test?
Car battery problems, specially a parasitic battery drain, are difficult to diagnose sometimes. New vehicle models make it specially difficult, time consuming, and frustrating. They come with more control modules than previous year models and hundreds more electrical circuits.
How do you test a parasitic battery drain?
Testing the battery is the only way to find out. To find a parasitic battery drain, use the process of elimination to narrow down the problem. Charge your battery if necessary. Dead batteries (and even weak ones) don’t give accurate results on a draw test. The dome light is a good indicator of battery strength.
How do you check car battery drain?
Check for Battery Drain: Start by removing the negative side battery cable from your car battery (this is the black one). Connect the red wire to the “10A/20A” input port on your multimeter. Make sure you do not put the red cord into the “mA” input port on the multimeter as it will not work for this test and can often damage the multimeter.
How do you check a battery with a multimeter?
How to check car battery with multimeter. The first test with your multimeter will measure DC voltage, indicated with a solid line and a dashed line above a letter V. Set the dial to 20, which will allow you to accurately measure between 0-20 Volts. Touch the red probe to the positive terminal, and the black probe to the negative terminal.
What is a parasitic battery drain?
A parasitic battery drain is when an abnormal and continuous discharge of power occurs after having shut off the engine. Usually, this is caused by a short circuit or an electrical device that remains in the “on” position or energized, such as: A trunk.