How big is the rotor on a 1988 CK truck?

How big is the rotor on a 1988 CK truck?

If the truck is a 1988-91 regular cab, not 454 SS then they use a spindle that takes a 1″ thick rotor setup. Everything else takes a 1.25″ thick rotor that needs a different spindle.

Where is the control arm on a 1988 CK truck?

These trucks use the control arm / spindle set up in the front as did the previous GM trucks. There were two different spindles on the 1500’s that can cause some headaches if you don’t pay attention. If the truck is a 1988-91 regular cab, not 454 SS then they use a spindle that takes a 1″ thick rotor setup.

How do you lower a Ck truck 4×4?

This is also the first generation that we have parts available to lower the 4×4’s. Use a set of keys in the front for about 2 inches of drop and the rear is the same as the 2WD trucks. Le transporteur a eu beaucoup de… Le transporteur a eu beaucoup de difficultés a livré mon colis.

How big is a drop on a Ck truck?

Good news is you can usually measure without even taking a wheel off. In the rear is a standard leaf spring setup. A shackle will get you 2 inch drop, shackle / hanger combo gets you 4 inch drop and a flip kit will give you 6 to 7 inches. (The difference in drop with the flip kit is the thickness of the leaf pack.

Is the 1988 Chevy Silverado 1500 classics for sale?

Here we have a 1988 Chevrolet C1500 for sale. This Truck is in Excellent Condition for this Model. This Southern Truck has 201K Miles displaying. The Body is Solid on it and it has been done in the… More Info › Truck has been in the family since it was purchased new by my father.

Why does my Chevy C / K 1500 bog out under acceleration?

It always bogs under acceleration, wont peel out even when its wet, and must downshift to gain speed on the highway (but it still runs at the normal rpm range when on the highway). 16 people found this helpful.

What kind of transmission does a Chevy c1500 have?

Only the 2500 and 3500 models were equipped with the 7.4-liter V-8. A compact 160-hp 4.3-liter V-6 was intended for Chevy’s smaller trucks, but found its way into a few 1500 models. The C1500 came standard with a four-speed automatic overdrive transmission. Four-wheel-drive diesels came standard with a three-speed automatic overdrive transmission.

What was the curb weight of a 1988 Chevy Silverado?

Depending on the engine, transmission and selected options, the 1988 Silverado had a curb weight of between 3,869 and 5,371 lbs.

Posted In Q&A