How big is the cylinder head on a Kia Sportage?
Using a caliper gauge, measure the inside diameter of the valve guide. Intake / Exhaust : 5.500 ~ 5.512mm (0.21654 ~ 0.21701in.) Using a micrometer, measure the diameter of the valve stem. Intake : 5.465 ~ 5.480mm (0.21516 ~ 0.21575in.) Exhaust : 5.458 ~ 5.470mm (0.214988 ~ 0.21535in.)
How to tighten cylinder head on Kia Sorento?
Using the SST (09221-4A000), tighten the cylinder head bolts and plate washers, in several passes, in the sequence shown. Always use new cylinder head bolts.
What causes compression pressure inspection on Kia Sportage?
If the bolts are removed and reused, it may cause the bolts to break or fail to maintain clamping force. Compression Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel econo …
When to remove exhaust manifold in Kia Sportage?
Compression Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel econo Removal WCC 1. Remove the exhaust manifold. (Refer to Engine Mechanical System – “Exhaust Manifold”) UCC 1. Remove the muffler.
How do you remove cylinder head on Kia Sportage?
Remove the cylinder head. Using triple square wrench, uniformly loosen and remove the 10 cylinder head bolts, in several passes, in the sequence shown. Remove the 10 cylinder head bolts and plate washers. Head warpage or cracking could result from removing bolts in an incorrect order.
If the bolts are removed and reused, it may cause the bolts to break or fail to maintain clamping force. Compression Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel econo
Compression Pressure Inspection If the there is lack of power, excessive oil consumption or poor fuel econo Removal WCC 1. Remove the exhaust manifold. (Refer to Engine Mechanical System – “Exhaust Manifold”) UCC 1. Remove the muffler.
When to remove cylinder head from Kia Rio?
To avoid damaging the cylinder head, wait until the engine coolant temperature drops below normal temperature before removing it. When handling a metal gasket, take care not to fold the gasket or damage the contact surface of the gasket.
Using a caliper gauge, measure the inside diameter of the valve guide. Intake / Exhaust : 5.500 ~ 5.512mm (0.21654 ~ 0.21701in.) Using a micrometer, measure the diameter of the valve stem. Intake : 5.465 ~ 5.480mm (0.21516 ~ 0.21575in.) Exhaust : 5.458 ~ 5.470mm (0.214988 ~ 0.21535in.)