Does OBD2 show transmission temperature?
Yep, you can get the transmission temp with the OBD2 bluetooth adapter and Torque Pro.
What should the temperature be for an automatic transmission?
The ideal temperature for an automatic transmission is around 175 degrees. Cars do often have the coolant for the engine as a heat exchanger for the transmission fluid and therefore, they will often hold the same temperature if you are driving it normal. However, if your transmission is slipping a lot…
What happens when the transmission temperature reaches 290?
The fluid varnish starts destroying the internal components of the engine like the valves. By the time the temperatures reach 250 degrees, the rubber seals have started cracking and leaking pressure and liquid. At over 290 degrees, the transmission will often have stopped working due to damaged parts and seals.
What to do if your Honda transmission is not working?
Honda has come up with a transmission software update that can prevent the lockup clutch from staying engaged. Call your Honda dealer to give them your VIN and ask if there is a transmission software update. The dealer may let you know over the phone or require you to take the car to verify.
What is the fault code for a Honda transmission?
While there are hundreds of possible fault codes, here is a list of the most common Honda transmission fault codes. P0766 “ Failed Shift Solenoid D “ This DTC can be stored when there is a problem with a shift solenoid or the valve body.
What should the temperature be for transmission to stop working?
By the time the temperatures reach 250 degrees, the rubber seals have started cracking and leaking pressure and liquid. At over 290 degrees, the transmission will often have stopped working due to damaged parts and seals. The first thing you need to do is to check the color of the transmission fluid.
What was transmission temp in 87 degree weather?
So while idling in 87 degree weather in traffic on a mountain pass I noticed my transmission fluid temperature got up 212 degrees before starting to come down. I wasn’t towing or hauling anything.
What should the transmission temp be in Death Valley?
The oil begins to degrade significantly above 270 degrees Fahrenheit, so we design vehicles so that in all but the most extreme conditions, the fluid temperature in the transmission sump stays below 270 degrees F. We allow for up to 285 degrees F in extreme conditions (i.e. towing a trailer with combination loaded at GCWR in Death Valley).
What are the signs of a bad Transmission Control Module?
Some of the most common signs of transmission control module failure include trouble shifting gears, getting stuck in gear, and lower gas mileage. But there are so many other red flags to look out for. Any signs of a bad transmission control module warrant a trip to your local mechanic.
What temperature should you check transmission fluid?
According to Toyota, the ideal time to inspect the transmission fluid level is when the temperature of the fluid is between 104 and 113 F. You are generally checking the fluid level in your shop that is around 190 F.
What does it mean when the transmission stick says hot?
If the fluid level was below the “Hot” range on the dipstick when the engine is hot, then you need to add more transmission fluid to the transmission. Make sure you choose the right transmission fluid, though, because not all fluids will be compatible with your vehicle’s transmission.
What temp is too high for transmission fluid?
#1 Cause of Failure The optimal temperature range for transmission fluid is 175 to 220 degrees. Above that, for every 20 degrees bad things happen, starting with formation of varnish at 240 degrees, followed by seals hardening, plates slipping, seals and clutches burn out, carbon is formed, and, ultimately, failure.
What should the temperature of transmission fluid be?
Keeping the transmission temperature between 175 and 200 degrees will allow the fluid to last the longest. This is the normal operating temperature for a transmission. Remember the fluid is the life line or blood of the transmission.
What are the OBD codes for a fluid temp sensor?
Related trans fluid temperature sensor “A” circuit codes: P0710 Transmission Fluid Temperature Sensor A Circuit Malfunction P0712 Transmission Fluid Temperature Sensor A Circuit Low Input P0713 Transmission Fluid Temperature Sensor A Circuit High Input P0714 Transmission Fluid Temperature Sensor A Circuit Intermittent
When do you check the transmission fluid level?
Since the engine is barely warm at this point, you want the level to be somewhere in the “Cold” range. To get an accurate transmission fluid level reading when the engine is hot, you will need to check the level after normal driving (idling in the driveway is not enough).
What does transmission fluid temperature sensor a circuit mean?
Transmission Fluid Temperature Sensor A Circuit Range/Performance What does that mean? This diagnostic trouble code (DTC) is a generic powertrain code, which means it applies to OBD-II equipped vehicles which have a transmission fluid temperature sensor (Jeep, Ford, Nissan, Toyota, Honda, Infiniti, Acura, Jaguar, Lexus, etc.).