Does Jeep Grand Cherokee have power liftgate?
To adjust the power lift gate on the Jeep Grand Cherokee with the liftgate open, manually adjust to the preferred height. The power liftgate is a great feature to have as the feature allows You to fully open and close the liftgate using a switch on the drivers interior door panel.
What happens when you power close the liftgate?
Power liftgate closes immediately after fully opening. Usually has a loud clunking noise at top of gate travel just before power closing— it will open fully, drop a few inches, then power close. 1 Weak strut (s) (PLG goes into a customer safe mode and power closes gate slowly).
How to disable the power liftgate on a GM car?
1 Weak strut (s) (PLG goes into a customer safe mode and power closes gate slowly). Turn off the power liftgate using the disable switch in the bottom of the center stack. Manually open the liftgate to the full open position using the exterior liftgate pull handle.
What to do if your power liftgate reverses?
3 Sill plate activating liftgate close switch. Inspect the sill plate for proper installation/clearance to the touch pad switch and possible bent retainers. Power liftgate reverses while closing at the start (top) of travel. 1 Strut stanchion (strut dries out while sitting open for long periods).
Are there any problems with the liftgate on the GM enclave?
GM has issued a service bulletin to address power liftgate problems on Enclave, Traverse, Acadia, and Outlook vehicles listed below. GM has documented the following power liftgate problems and their causes
1 Weak strut (s) (PLG goes into a customer safe mode and power closes gate slowly). Turn off the power liftgate using the disable switch in the bottom of the center stack. Manually open the liftgate to the full open position using the exterior liftgate pull handle.
Power liftgate closes immediately after fully opening. Usually has a loud clunking noise at top of gate travel just before power closing— it will open fully, drop a few inches, then power close. 1 Weak strut (s) (PLG goes into a customer safe mode and power closes gate slowly).
GM has issued a service bulletin to address power liftgate problems on Enclave, Traverse, Acadia, and Outlook vehicles listed below. GM has documented the following power liftgate problems and their causes
3 Sill plate activating liftgate close switch. Inspect the sill plate for proper installation/clearance to the touch pad switch and possible bent retainers. Power liftgate reverses while closing at the start (top) of travel. 1 Strut stanchion (strut dries out while sitting open for long periods).