Does Cabriolet mean convertible?
As you may have expected, cabriolet is a foreign word for convertible. It defines a vehicle that has a hard- or soft-top retractable roof. This can be found on a sedan, coupe, wagon, or even an SUV in some cases.
How to remove the convertible top on a Porsche Carrera?
In thisPicture, you can see the manual override port (green arrow). Turning the 6mm screw inside counter-clockwise closes the latch, turning it clockwise opens the latch. To remove the latching mechanism, remove the four Torx bolts holding the latch assembly to the front of the convertible top (green arrows).
What’s the best way to Stap a convertible top?
Stapling of a convertible top is best done with an air driven staple gun (which can be rented) or via our heavy duty electric staple gun. Modern tops are doing away with staples and often with glue work. These often require the use of a common pop rivet gun and the removal and replacement of straps, screws, bolts and convertible top frame seals.
When to replace hold down Cable on convertible top?
Replacement hold down cables are recommended when the top frame has been frequently raised and lowered. Some tops have rear base attachment cables (Jaguar, Volkswagen) but most do not. And a few tops have short rear side cables for the corner flaps of the convertible top.
How to remove cab top on Green Tractor?
Here is the thread http://www.greentractortalk.com/for…Y-got-my-new-4520&highlight=cab+radio+install So, what you need to do is remove all the nuts that are in the black strip under the green top. They are easy to find. Once you remove them, you need to bump the top and get it to start to lift off.
Replacement hold down cables are recommended when the top frame has been frequently raised and lowered. Some tops have rear base attachment cables (Jaguar, Volkswagen) but most do not. And a few tops have short rear side cables for the corner flaps of the convertible top.
What are the parts of a convertible top?
Convertible Top Accessories There are important components of a convertible top installation that are not part of the actual convertible top. The important ones are the top hold down cables, the frame bow tacking strips, the convertible top pads (or webbing), the top’s rear well liner and possibly other items.
Stapling of a convertible top is best done with an air driven staple gun (which can be rented) or via our heavy duty electric staple gun. Modern tops are doing away with staples and often with glue work. These often require the use of a common pop rivet gun and the removal and replacement of straps, screws, bolts and convertible top frame seals.
Is there a manual to install a convertible top?
NEW EDITION! This 40-page, extensively illustrated how-to manual walks you through removing and installing a two-part convertible top. Any handy person can remove and install their own convertible top and save hundreds of dollars on labor costs.