Do you need to remove the intake manifold on a Mercedes?
There are several common problems that need to be eventually fixed with the EGR and swirl flaps on the Mercedes intake manifold. Unfortunately, you need to remove the complete manifold to access the repairs.So here I begin this post to show you how to remove Benz intake manifold.
Is the intake manifold on a Mercedes CLK 350?
In our example, we had a 2006 Mercedes-Benz CLK 350 (272.9 engine) with a check engine light on for multiple misfires. We have seen O2 codes as well as lean codes, so be sure to test your system correctly. Once you have completed this step, it is time to look at the manifold, paying special attention to two areas on the front of the intake.
How to install Mercedes Benz OM642 diesel intake manifold?
If you need any further guidance on this install or would like to purchase the parts shown please call us on +44 01843 446643 or email us at [email protected]. Please also check out our instruction guide on YouTube. www.x8r.co.uk
Where can I find the intake and exhaust manifolds?
Find your model, click Engine, click Intake and Exhaust Manifolds. You can then check the part number corresponds to the ones in this listing. You can also visually inspect the manifold by removing the engine covers to confirm compatibility. Please note our rod will replace rods both with and without sensor pick-ups. Will fit both.
There are several common problems that need to be eventually fixed with the EGR and swirl flaps on the Mercedes intake manifold. Unfortunately, you need to remove the complete manifold to access the repairs.So here I begin this post to show you how to remove Benz intake manifold.
In our example, we had a 2006 Mercedes-Benz CLK 350 (272.9 engine) with a check engine light on for multiple misfires. We have seen O2 codes as well as lean codes, so be sure to test your system correctly. Once you have completed this step, it is time to look at the manifold, paying special attention to two areas on the front of the intake.
What is the job of the intake manifold?
As you know, the primary job of the intake manifold is to evenly distribute the combustion mixture (or the air in a direct-injection engine) to each intake port in the cylinder head (s). Even distribution is important to optimize the efficiency and performance of the engine.
If you need any further guidance on this install or would like to purchase the parts shown please call us on +44 01843 446643 or email us at [email protected]. Please also check out our instruction guide on YouTube. www.x8r.co.uk