Do you need a PCM for a GM car?
Depending on the year, model and engine of your GM vehicle, your starting system may be less complicated or use only some of the components shown here. For example, earlier anti-theft systems didn’t communicate the same way with the PCM. The bottom line is you MUST get the wiring diagram for your particular vehicle.
Why does my GM car say no start no crank?
How to diagnose a no start no click on GM vehicle. If you have a late model GM vehicle and turn the key only to hear nothing, you’ll most likely think you have a dead battery—and you may. But a no start, no crank, no click condition can be far more involved than that.
Is the ignition switch part of the PCM?
The ignition switch now talks to the body control module (BCM) and it’s the BCM that initiates one of two relays. The second relay, the more important of the two, is controlled by the powertrain control module (PCM).
Why is my PCM not working in my car?
This generally happens because of a faulty sensor, or because water has damaged some of the circuits in your car’s PCM or TCM. If your automatic transmission vehicle isn’t shifting normally, take it to a mechanic immediately. A failed PCM or TCM can cause the car to get stuck in gear, which can be a serious safety issue.
Can a bad ECM cause a car to not start?
Of course, there are other reasons a car may not start, including a bad starter or a blown alternator. If you’ve replaced these parts and your car won’t start, your ECM is the most likely cause. Once again, you’ll need to take your car to a mechanic to be sure.
What are the gauges on my Jeep Cherokee not working?
The volt gauge, oil pressure gauge and fuel gauge work intermittent as well, just like wiggling the ignition key to make the tach work for 5 seconds I wiggle the key to make the volt,fuel, oil pressure gauges work. The speedometer works intermittent as well. The jeep drives fine no drivabality issues (no stalling or hesitation)
What are the symptoms of a bad ECM computer?
There are a few things that can tip you off that there’s a problem. Here are the four most common symptoms of a bad ECM computer: There are many reasons your Check Engine light can turn on. These range from emissions problems to faulty O2 sensors to problems with the ECM.