Do rear drum brakes have wheel bearings?

The bearings are located in the wheel hub on disc-brake wheels, and inside the brake drum, which forms part of the hub, on drum-brake wheels. They may be either tapered roller bearings or ball bearings . Both types need regular adjustment (See Adjusting wheel bearings ) and lubrication with grease.

What would cause rear brakes to wear out quickly?

But there is a reason why rear brake pads can wear faster than expected: traction control and electronic stability control. Besides (for some cars) the tire-pressure monitoring system, your ABS is linked to the ESC and traction control, Motor Trend reports.

What is the procedure for cleaning the old bearings?

Service Procedure

Soak the bearings in a metal basket suspended in a clean container or tank holding a recommended solvent.
After dirt and grease is removed, rinse the bearings in another clean bucket of solvent.
Dry the bearings.
After cleaning, inspect the bearing thoroughly for nicks, leftover dirt and damage.

Can a Toyota Corolla wheel bearing be replaced?

Okay, so now let’s assume you have narrowed down the problem to one of your rear bearings. The most common way to replace this on a Toyota Corolla is to replace the entire Wheel Bearing Hub Assembly.

How to remove drum brake from Toyota Corolla?

Screw the two M8×1.25 bolts into the holes in the drum brake to push it away from the hub. It may be rusted to the hub so prepare for some cracking sounds. Remove the drum once it is free 8. Remove the four 12mm bolts on the back of the hub. You may need a breaker bar.

How to replace rear wheel bearing hub assembly?

How much does it cost to replace rear wheel bearing assembly?

This easy DIY is to replace the entire REAR hub bearing assembly and takes about 50 minutes. – the OEM Toyota rear hub bearing assembly WITH ABS is much cheaper ($135) than the one without ABS ($260) and still fits cars without ABS. Other brands start at around $90. – 2 M8×1.25 bolts.

Navigation