Do I need a slip yoke?
However, any lift of greater than two inches virtually always requires a slip yoke eliminator installation and CV driveshaft installation, which will limit vibrations and won’t come with any of the issues often present in transfer case drops.
When to use a slip yoke eliminator on a Jeep Cherokee?
If your Cherokee has more than 3 inches of lift with no transfer case drop, or 4-5″ with a transfer case drop you should consider an XJ SYE kit. If you’re at 4″ or mot without a transfer case drop kit, then a Slip Yoke Eliminator is definitely something you should do.
What kind of slip yokes do I need for a 2WD truck?
Slip yokes for spline and slip style 2wd and 4wd truck driveshafts. Choose from slip yokes to fit front or rear one piece or two piece driveshafts or CV Double Cardan style 4×4 spline and slip style drive shafts
Where is the slip yoke located on a Jeep XJ?
The slip yoke is located on the output shaft of the transfer case. On 84-95 models, the yoke slides in and out of the transfer case and is lubricated by the ATF fluid internally. On 96-01 due to a design change, the slip yoke is external (does not slide in and out of the transfer case).
What kind of slip yoke does Denny’s use?
Denny’s Driveshafts offers a complete line of standard and high performance car and light truck manual and automatic transmission slip yokes as well as four wheel drive truck transfer case slip yokes. They come in 1310, 1330 and 1350 series, GM 3R series and Dodge 7260 and 7290 series.
Can a jeep TJ have a slip yoke?
A Jeep TJ or YJ runs into a massive problem when lift heights increase: the driveshaft slips out of the transfer case. To solve this issue, the slip yoke is eliminated with an SYE kit (slip yoke eliminator kit). This upgrade is a must have for those of us with older Jeeps looking to achieve greater lift heights.
What is the purpose of a slip yoke?
The slip yoke is typically an internal splined shaft that is connected to your driveshaft by means of a universal joint. The purpose of the slip yoke is to transfer power from the transfer case to your driveshaft. It slides in and out of your transfer case allowing it to
Do you need a yoke eliminator for a Jeep Wrangler?
Some manufacturers will provide a standard slip yoke eliminator kit as well as a mega short kit, shortening your transfer case even further. These kits include the back half of the transfer case, a splined shaft for the u-joints to mate too, all of the proper output shaft bearings and seals, as well as a speedometer drive gear.
What does a limited slip differential do in a jeep?
A Limited Slip Differential, or an LSD, is a traction aid that is most often clutch or gear driven. A simple explanation is that as a wheel starts to slip/spin the LSD detects this and transfers “some” power to the wheel that is not slipping/spinning.