Can you replace the front axle on a Jeep Cherokee?
If the front axle in your Jeep Cherokee becomes damaged and requires replacement, it can be removed from the Jeep as one unit. The axle is heavy and does require more time than some basic tasks, but it can be removed with basic tools and a little patience.
Are there any modifications to the Jeep Cherokee?
Overall, the Jeep Cherokee is an excellent platform and great all around vehicle. Over time, Jeep fixed some of the XJ’s shortcomings, and XJ owners figured out how to address others. Here is a short list of some great modifications that can be done to improve the performance of any Cherokee. 1. Fender Trimming
Where does the new Jeep Cherokee get its name?
Cherokee name revival in the U.S. The Jeep Liberty was sold outside of North America as the Jeep Cherokee (KK), allowing the new Cherokee to be easily marketed globally. Jeep also believes the Cherokee name will attract previous Jeep owners, because of the name’s heritage. The new Cherokee is built in Toledo, Ohio.
Do you need to change the springs on a Jeep Cherokee?
Typically, the front springs don’t sag too much so you won’t need to do anything if you are just restoring the ride height to a nice comfy stock height. Should you need new front coil springs, look for TJs or older Grand Cherokees (ZJs).
How big are the front axles on a jeep?
Model 30 Front Axle: CJ-5, CJ-7, Scrambler, YJ, XJ and TJ. Front Axles Dana 30 high pinion – reverse cut used 84-99 (some axles through 91 are vacuum disconnect, 92+ are non-disconnect, 89-95 with ABS have 5-297x u-joints, all 95+ have 5-297x u-joints, all others have 5-260x u-joints) Shaft diameter = 1.16″
What kind of axle lubricant does a jeep use?
Front Axle Lubricants: Jeep Axle Lubricant or equivalent of SAE 85W-90, API grade GL-5 quality, Grade MIL-L-2105C. Dana 35 Rear Axle was used by Jeep for the XJ Cherokee 1984-97, MJ Comanche 1986-92, YJ Wrangler 1987-95, TJ Wrangler 1997-98, and Wagoneer 1984-97.
What happens when an axle breaks on a Jeep Wrangler YJ?
When an axle breaks on a challenging off-road trail, it may render your vehicle undriveable. Because they are not designed for uneven and unpaved terrain, Jeep Wrangler YJ axle and hubs are far more likely to fail if they are the original stock parts.
What kind of front axle does a Jeep XJ have?
Motive Gear Ring and Pinion Kit for 84-95 Jeep Cherokee XJ & Wrangler YJ with Dana 30 Front Axle – AFTERMARKET UPGRADE! Motive Gear Ring and Pinion Kit for 84-95 Jeep Cherokee XJ & Wrangler YJ with Dana 30 Front Axle – AFTERMARKET UPGRADE!
Where to buy Jeep Wrangler YJ Dana 30 front axle parts?
We carry the largest selection of Jeep Wrangler YJ Dana 30 Front Axle & Differential Parts around! And at the best prices.
What kind of differential cover does Jeep XJ use?
Dana Spicer 5-760X 297x / 760x Replacement Series U-Joint for 91-06 Jeep Wrangler YJ, TJ & Unlimited, 92-01 Cherokee XJ, 93-99 Grand Cherokee ZJ & WJ – AFTERMARKET UPGRADE! Riddler Manufacturing RD30 Differential Cover for Dana 30 Axles – AFTERMARKET UPGRADE!
Where are the shock absorbers located on a Jeep Cherokee?
Locate and remove the four retaining bolts where the front drive shaft meets the axle. Use a 10 mm wrench to loosen the bolts and slide the shaft out of the axle yoke, setting it out of the way. Locate the lower mounting bolts for the front shock absorbers on the axle near the base of the coil springs.
What kind of wrench do you need to remove front axle on Jeep?
You’re going to need a big hammer, a couple of socket wrenches, with a 12-point, half-inch socket. Depending on the year, you’ll need a half inch socket or a seven millimeter Allan socket. These are for the earlier Jeeps, like ’90 and earlier.
What’s the best way to remove a rear axle?
Pull Tip: Always remember that the front axle needs to have the exact same gearing ratio as the rear axle. Most of the time you can find the gear ratio on a tag on the axle diff cover. Remove the Wheels and Tires. TIP – Using Penetrating Oil on all the nuts and bolts first will really help the process.
What’s the front axle on a Jeep Cherokee?
OK, so what we’re after today is the front axle shaft. This is out of a ’95 Jeep Cherokee. The front axle shaft is what drives the front wheels when you’re in four wheel drive. It’s got a u-joint in it, and everything spins, so that you can get traction up front.
How do you remove an axle from a jeep?
If the nuts come loose from the bolts but the bolts do not come out of the arms, drive them out with a small, steel bar and a hammer. Lower the jack supporting the axle to the ground carefully. The coil springs will drop with the axle and can be removed after the axle is out from under the Jeep.
Locate and remove the four retaining bolts where the front drive shaft meets the axle. Use a 10 mm wrench to loosen the bolts and slide the shaft out of the axle yoke, setting it out of the way. Locate the lower mounting bolts for the front shock absorbers on the axle near the base of the coil springs.
How big is the front axle socket on a jeep?
Now, that’s a 36 millimeter socket. That’s very specific to the front axle on a Jeep, the Dana Next order of business is to remove the brake, so that’s either going to be a 13 millimeter or it’s going to be a seven millimeter Allan, if it’s an older Jeep. There’s only two bolts holding those in, and then, you should be able to pull it off.