Can you replace the belt on a 2002 Ford Ranger?
Replacing the belt on your 2002 Ford Ranger can now be done in a matter of minutes and requires only basic hand tools. This is a perfect project for the home mechanic to save money on auto repairs.
How do you reinstall a serpentine belt on a pulley?
Belt Installation Reverse the procedure to reinstall the serpentine belt on the pulley system auto tensioner. Be careful to get the belt on the the other pulleys and aligned properly on all parts of the complicated routing, then apply the tool to allow the belt to be slipped onto the tensioner pulley.
Do you need an auto tensioner for a serpentine belt?
The serpentine belt system consists of only one belt and one automatic belt tensioner. The process is often tricky with various manufacturer’s designs, but is not very difficult and may be done using basic hand tools.
What’s the difference between serpentine belt and V belt?
Serpentine belt systems provide us with superior wear, reduced noise characteristics (squeal and drumming) and ease of replacement when compared to the old v-belt systems used in the 1970s and early 1980s. Replacing the belt on your 2002 Ford Ranger can now be done in a matter of minutes and requires only basic hand tools.
How does the belt tensioner on a Ford Ranger work?
The serpentine belt tensioner presses its pulley against the serpentine belt, which provides the tension to hold the belt on the various pulleys in the system. The tensioner has an internal spring that provides this tension.
How do you remove a belt from a tensioner?
If the belt is still on, move to step two; if the belt is gone, skip ahead to step three. Put the belt tensioner tool into the tensioner and lever it back to release the pressure from the serpentine belt. Slide the belt off the tensioner pulley with your free hand.
What do you need to know about serpentine belts?
The sticker is white, with black ink showing a diagram of the serpentine belt and how it routes around each pulley. If the belt is still on, move to step two; if the belt is gone, skip ahead to step three. Put the belt tensioner tool into the tensioner and lever it back to release the pressure from the serpentine belt.
How to remove idler pulley on Ford Ranger?
The idler pulley needs a 15 mm to remove it, and here it is removed. Also if this is the first time the idler was removed there is a retainer spring on the bolt. You need to remove that spring (#$^@#&* – LOL).