Can oil leak from the camshaft position sensor?
The Camshaft position sensor can leak oil into its electrical connector causing the Check Engine light to illuminate. The engine may also stall intermittently as a result.
Where is the oil leak on a 272 / 273 Mercedes?
272/273 Engines: The most likely rear engine leaks include the oil separator and the cam plugs ( 30mm and 65mm ). The oil separator is held onto the back of bank 1 (passenger side) with either 4 torx bolts or 4 external torx bolts. Remove the oil separator, replace, and clean the oil residue from the engine.
Where to find oil leak on cam position sensor?
If the source of the leak was in that area it would have to be tucked away on the right side of the sensor almost under the valve cover in an area with minimal turbulence. Labor calls for 9/10, dealer parts will be $100 and after misc fees im expecting to pay $200.
Where is oil leaking from the crankshaft seal?
Just so we are clear the cam sensor on the left near the water pump outlet is where we see oil as you can see from the video. Its also possible the oil leak from the crankshaft seal is putting out the oil we see spreading accross the timing chain cover. The most significant oil I see in the area of the cam sensor is from below.
What kind of engine leaks in Mercedes Benz?
M272 – V6 used from 2004-2011, C-Class, E-Class, SLK, CLK, R-Class, Sprinter, GLK M273 – V8 used from 2006-2014, E-Class, SL, S-Class, CLS, G-Wagen, ML, GL, R-Class 272/273 Engines: The most likely rear engine leaks include the oil separator and the cam plugs ( 30mm and 65mm ).
If the source of the leak was in that area it would have to be tucked away on the right side of the sensor almost under the valve cover in an area with minimal turbulence. Labor calls for 9/10, dealer parts will be $100 and after misc fees im expecting to pay $200.
Where does the oil leak on a Mercedes Benz come from?
M273 – V8 used from 2006-2014, E-Class, SL, S-Class, CLS, G-Wagen, ML, GL, R-Class 272/273 Engines: The most likely rear engine leaks include the oil separator and the cam plugs ( 30mm and 65mm ). The oil separator is held onto the back of bank 1 (passenger side) with either 4 torx bolts or 4 external torx bolts.
Just so we are clear the cam sensor on the left near the water pump outlet is where we see oil as you can see from the video. Its also possible the oil leak from the crankshaft seal is putting out the oil we see spreading accross the timing chain cover. The most significant oil I see in the area of the cam sensor is from below.
Why does a camshaft seal need to be replaced?
Worn out cam seals need to be replaced to prevent oil loss. The camshaft seal is designed to seal the end of the camshaft. Over time, seals harden and begin to leak. Seals can also fail from excess crankcase pressure, but that happens much less frequently. A failed camshaft seal can result in oil loss and potential timing belt contamination.