Can Hear fuel pump but no pressure?
These include a bad fuel pump relay or control module, a blown fuse, a wiring fault, loose or corroded wiring connector at the pump, or even an issue with the anti-theft system. These include a plugged fuel filter, pinched fuel line or a bad fuel-pressure regulator.
What would cause a fuel pump not to prime?
The most common cause of the fuel system not holding pressure up to the injectors is the fuel pump inside the fuel tank. You should have a mechanic like one from YourMechanic come and test the hard start to see if the pump is bad or there is another issue like a pressure regulator not holding pressure.
What to do if your fuel pump is not working?
If nothing after that, then the fuel pressure regulator is not working and needs replacing. If you get pressure to the rail, then there could be a problem with the injectors; they may be either dirty or plugged up. Take the injectors off the engine and clean them with CLR.
What should the PSI be on the fuel pump?
With the engine off and key on, there should be 45 to 60 PSI on the gauge. If there is nothing on the gauge, then check your connection to the shrader valve. You may need to remove the shrader part of the valve from the threaded tube. If there is still no pressure, then replace the fuel filter and retest.
Can a fuel pump control the fuel pressure?
The ECU doesn’t control fuel pressure so it’s not like you tripped some kind of electronic relief valve. I’d focus on the sending unit and fuel lines before anything else. ’91 3000GT VR4: Build in progress….
What to do if there is no fuel in the engine?
If there is still no pressure, then replace the fuel filter and retest. If nothing after that, then the fuel pressure regulator is not working and needs replacing. If you get pressure to the rail, then there could be a problem with the injectors; they may be either dirty or plugged up. Take the injectors off the engine and clean them with CLR.