Can a mini bleeder be used on a clutch?
It has a less fussy check valve. Fluid flows out without the need for a bleeder pump, so you can refill the line. Once the line is primed, pumping the clutch lever with the mini bleeder you can fill and bleed the clutch easily. Works like a charm.
How does a speed bleeder work on a Honda Goldwing?
The speed bleeders on the remaining brake lines worked like a charm from that point on. Just pump the lever or pedal and fluid works it’s way into the line, and out the bleeder. No need for break bleeder pump required.
How big of a bleed screw do I need for a hex nut?
Too many people will say 8 mm or 10 mm when talking about bolts and nuts and they are referring to the size of the wrench needed to loosen or tighten the hex nut or bolt head. The millimeter size that is important with these is the thread size. All the bleed screws needed are are 8 x 1.25 mm threads.
What should I do if I Bleed my Clutch on my Honda?
Loosen the banjo bolt a quarter-turn, using your wrench, to force out any air trapped within the clutch master cylinder. Tighten the banjo bolt. Repeat until there is less then 2 mm of brake fluid within the clutch master cylinder, then remove your wrench and wipe away any spilled brake fluid.
Where is the bleed valve on a Honda?
Follow the clutch hose from the clutch master cylinder to the clutch slave cylinder, located on the left side of the engine crankcase. Pull the rubber dust cover off the bleed valve, located on the top of the clutch slave cylinder.
Where is the bleeder screw on a Honda bike?
Follow the clutch line from the clutch master cylinder to the clutch slave cylinder on the motor’s clutch cover. Locate the bleeder screw on the top left side of the clutch slave cylinder. Slip one end of a piece of clear plastic tubing over the bleeder screw and place the opposite end into a container.
It has a less fussy check valve. Fluid flows out without the need for a bleeder pump, so you can refill the line. Once the line is primed, pumping the clutch lever with the mini bleeder you can fill and bleed the clutch easily. Works like a charm.